{"id":538,"date":"2026-09-10T06:15:41","date_gmt":"2026-09-10T06:15:41","guid":{"rendered":"https:\/\/drivelines.net\/product\/t2-pto-drive-shaft-270-nm-agricultural-cardan-shaft\/"},"modified":"2026-09-10T06:15:41","modified_gmt":"2026-09-10T06:15:41","slug":"t2-pto-drive-shaft-270-nm-agricultural-cardan-shaft","status":"publish","type":"product","link":"https:\/\/drivelines.net\/pt\/produto\/t2-pto-drive-shaft-270-nm-agricultural-cardan-shaft\/","title":{"rendered":"Eixo cardan agr\u00edcola T2 com tomada de for\u00e7a (PTO) de 270 Nm"},"content":{"rendered":"
\n

<\/p>\n

\n
\n
<\/div>\n

270 Nm @ 540 rpm<\/p><\/div>\n

\n
<\/div>\n

450 Nm Peak Torque<\/p><\/div>\n

\n
<\/div>\n

15-25 hp<\/p><\/div>\n

\n
<\/div>\n

CE Certified<\/p><\/div>\n

\n
<\/div>\n

ISO 9001 \/ TS16949<\/p><\/div>\n

\n
<\/div>\n

MOQ 1 pc \u2014 LGPD Ready<\/p><\/div>\n<\/div>\n

T2 PTO Drive Shaft \u2014 Operating Torque Parameters<\/h2>\n
\"T<\/p>\n

Source: Jiukai Driveline Catalog \u2014 current series highlighted in orange<\/p>\n<\/div>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
S\u00e9rie<\/th>\nCross mm<\/th>\nKw @540<\/th>\nPk @540<\/th>\nNm @540<\/th>\nKw @1000<\/th>\nPk @1000<\/th>\nNm @1000<\/th>\nMP Nm<\/th>\n<\/tr>\n<\/thead>\n
T1<\/td>\n22×54<\/td>\n12<\/td>\n16<\/td>\n210<\/td>\n18<\/td>\n25<\/td>\n172<\/td>\n320<\/td>\n<\/tr>\n
T2<\/td>\n23.8×61.3<\/td>\n15<\/td>\n21<\/td>\n270<\/td>\n23<\/td>\n31<\/td>\n220<\/td>\n450<\/td>\n<\/tr>\n
T3<\/td>\n27×70<\/td>\n22<\/td>\n30<\/td>\n390<\/td>\n35<\/td>\n47<\/td>\n330<\/td>\n640<\/td>\n<\/tr>\n
T4<\/td>\n27×74.6<\/td>\n26<\/td>\n35<\/td>\n460<\/td>\n40<\/td>\n55<\/td>\n380<\/td>\n780<\/td>\n<\/tr>\n
T5<\/td>\n30.2×80<\/td>\n35<\/td>\n47<\/td>\n620<\/td>\n54<\/td>\n74<\/td>\n520<\/td>\n1,050<\/td>\n<\/tr>\n
T6<\/td>\n30.2×92<\/td>\n47<\/td>\n64<\/td>\n830<\/td>\n74<\/td>\n100<\/td>\n710<\/td>\n1,450<\/td>\n<\/tr>\n
T7<\/td>\n30.2×106.5<\/td>\n55<\/td>\n75<\/td>\n970<\/td>\n87<\/td>\n118<\/td>\n830<\/td>\n1,800<\/td>\n<\/tr>\n
T7N<\/td>\n35×94<\/td>\n55<\/td>\n75<\/td>\n970<\/td>\n87<\/td>\n118<\/td>\n830<\/td>\n1,800<\/td>\n<\/tr>\n
T8<\/td>\n35×106.5<\/td>\n70<\/td>\n95<\/td>\n1,240<\/td>\n110<\/td>\n150<\/td>\n1,050<\/td>\n2,250<\/td>\n<\/tr>\n
T38<\/td>\n38×105.6<\/td>\n78<\/td>\n105<\/td>\n1,380<\/td>\n123<\/td>\n166<\/td>\n1,175<\/td>\n2,500<\/td>\n<\/tr>\n
T9<\/td>\n41×108<\/td>\n88<\/td>\n120<\/td>\n1,560<\/td>\n140<\/td>\n190<\/td>\n1,340<\/td>\n2,800<\/td>\n<\/tr>\n
T10<\/td>\n41×118<\/td>\n106<\/td>\n145<\/td>\n1,905<\/td>\n170<\/td>\n230<\/td>\n1,650<\/td>\n3,500<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

\n
\n
270 Nm<\/div>\n
Torque @ 540 rpm<\/div>\n<\/div>\n
\n
220 Nm<\/div>\n
Torque @ 1,000 rpm<\/div>\n<\/div>\n
\n
450 Nm<\/div>\n
Peak Torque (MP)<\/div>\n<\/div>\n
\n
15 Kw<\/div>\n
Power @ 540 rpm<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\nSeries: T2<\/span>
\nCross: 23.8×61.3 mm<\/span>
\n540 rpm: 15 Kw \/ 21 Pk \/ 270 Nm<\/span>
\n1,000 rpm: 23 Kw \/ 31 Pk \/ 220 Nm<\/span>
\nSteel: 20CrMnTi alloy<\/span>
\nSpline: 1-3\/8 Z6 \/ 1-3\/4 Z20<\/span>
\nShield: HDPE UV-stabilised<\/span>
\nGrease: EP2 lithium sealed<\/span>\n<\/div>\n
\"T2<\/div>\n

Overview<\/h2>\n
\n
⚙ Cross kit 2.01 (23.8×61.3) \u2014 Rated 270 Nm at 540 rpm<\/div>\n
⚡ Peak torque 450 Nm \u2014 For 15-25 hp tractors<\/div>\n
🔧 Forged alloy-steel yokes \u2014 Sealed needle-bearing cross kits (IP67)<\/div>\n
🛡 CE-compliant HDPE safety shield \u2014 included standard<\/div>\n
📐 Spline: 1-3\/8 Z6 (540 rpm) \u2014 1-3\/4 Z20 (1,000 rpm)<\/div>\n
🌎 CE + ISO 9001 \u2014 Brazil INMETRO \/ LGPD compliant<\/div>\n<\/div>\n

Product Description<\/h2>\n

T2 is the first step up from T1, covering 15\u201325 hp compact tractors. The cross kit 2.01 (23.8×61.3 mm) provides 29% more torque than T1 while remaining compact for narrow-track orchard and vineyard tractors. T2 is the minimum series recommended for continuous-duty irrigation pump applications. For the full T Series PTO drive shaft range<\/a>, see our category page.<\/p>\n

The T2 PTO Drive Shaft is widely used in the Brazilian and Argentine small-farm market where compact utility tractors dominate. Disc mowers, small wood chippers, centrifugal slurry pumps, and light-duty planters all fall within the T2 torque envelope. Buyers operating multiple implements on the same tractor should verify the T2 rating covers the highest-demand implement in the fleet. Cross-kit failure caused by intermittent use of an oversized implement on an undersized shaft is the most common failure mode in mixed-implement compact tractor operations.<\/p>\n

Irrigation pump drive applications place unique demands on the PTO shaft: unlike implement applications with variable shaft angle, a pump drive runs at a fixed angle for hours at a time, which prevents the self-lubricating effect of articulation. The sealed IP67 cross-kit specification is therefore particularly important for pump duty, and has been validated in year-round irrigation service without premature cross-kit failure. Full CE, ISO 9001, and TS\/16949 documentation for Brazil INMETRO and LGPD compliance. For technical enquiries, contact Ever-Power Drive Line<\/a>.<\/p>\n

Assembly Diagram \u2014 Component Reference<\/h2>\n
\"T2<\/p>\n

Component reference numbers correspond to part codes in the table below<\/p>\n<\/div>\n

\n
1<\/span>Cross Joint<\/span><\/div>\n
2<\/span>Joint Simple (Outer)<\/span><\/div>\n
3<\/span>Joint Simple (Inner)<\/span><\/div>\n
4<\/span>Splined Yoke<\/span><\/div>\n
5<\/span>Tube Yoke (Outer)<\/span><\/div>\n
6<\/span>Tube Yoke (Inner)<\/span><\/div>\n
7<\/span>Outer Tube<\/span><\/div>\n
8<\/span>Inner Tube<\/span><\/div>\n<\/div>\n

Component Part Numbers \u2014 T2<\/h2>\n
\"T<\/p>\n

Source: Jiukai Driveline Catalog<\/p>\n<\/div>\n

\n\n\n\n\n\n\n\n\n\n
Component<\/th>\nOuter \/ Outboard<\/th>\nInner \/ Inboard<\/th>\n<\/tr>\n<\/thead>\n
Cross Kit<\/td>\n2.01 (Ø23.8×61.3)<\/td>\n<\/tr>\n
Joint Simple<\/td>\n2.0505B+2.01+2.06<\/td>\n2.0505B+2.01+2.07<\/td>\n<\/tr>\n
Splined Yoke<\/td>\n2.0505B<\/td>\n<\/tr>\n
Tube Yoke<\/td>\n2.06<\/td>\n2.07<\/td>\n<\/tr>\n
Tube<\/td>\n2.03<\/td>\n2.04<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Spline Profile Reference<\/h2>\n
\"PTO<\/p>\n

Left: 1-3\/8 inch 6-spline (Z6) for 540 rpm \u2014 Right: 1-3\/4 inch 20-spline (Z20) for 1,000 rpm<\/p>\n<\/div>\n

Key Features<\/h2>\n
\n
\n
<\/div>\n
\n

Heat-Treated Yoke Forgings<\/p>\n

Alloy steel drop-forgings, shot-blasted and heat-treated. Fatigue life exceeds 1 million cycles at rated torque in field conditions.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Triple-Lip Sealed Cross Joints<\/p>\n

Triple-lip internal seals block water, mud, and crop debris. Factory-greased EP2 lithium complex grease. Extended regreasing intervals.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

OECD Code 4 Safety Shield<\/p>\n

Bellows-style HDPE guard meets OECD Code 4 and CE Machinery Directive. Integrated chain anchor brackets at both shield ends.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Push-Pin Quick-Release Yokes<\/p>\n

1-3\/8 inch Z6 push-pin yoke standard; 1-3\/4 inch Z20 and bolt-clamp options stocked. Lever-release for fast implement changes.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Custom OEM Manufacturing<\/p>\n

Non-standard lengths and alternative yoke profiles manufactured to customer drawing. First-article approval process standard.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Traceable Quality Records<\/p>\n

Dimensional inspection records, torque test samples, and paint adhesion verification per batch. Full traceability for import compliance.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

Typical Applications<\/h2>\n
\n
\n

Rotary Tillers<\/p>\n

15\u201325 hp compact tractor tilling. Sustained low-speed torque at rated capacity. Push-pin yoke standard for fast implement changes.<\/p>\n<\/div>\n

\n

Small Irrigation Pumps<\/p>\n

Continuous duty centrifugal pump drive at 540 rpm. Sealed cross kits are critical for fixed-angle pump applications running without articulation.<\/p>\n<\/div>\n

\n

Disc Harrows<\/p>\n

Moderate sustained torque for disc harrow gearbox drives. T2 cross-kit step-up from T1 suits disc harrow input shaft dimensions.<\/p>\n<\/div>\n<\/div>\n

Installation and Maintenance<\/h2>\n
\"PTO<\/p>\n

Attach safety chain to a fixed non-rotating point on both tractor and implement<\/p>\n<\/div>\n

\n
\n
1<\/div>\n

Select the Correct Series<\/p>\n

Use the torque table to select the series rated above your PTO output by at least 20%. Verify cross-kit size matches yoke seats.<\/p>\n<\/div>\n

\n
2<\/div>\n

Check Working Lengths<\/p>\n

Connect implement and raise to max height. Inner tube must overlap outer by 50 mm min. Lower: check 80 mm engagement remains.<\/p>\n<\/div>\n

\n
3<\/div>\n

Install Yoke Connections<\/p>\n

Push splined yoke fully onto tractor PTO; push-pin clicks into groove. Pull rearward to confirm retention. Repeat at implement end.<\/p>\n<\/div>\n

\n
4<\/div>\n

Attach Shield Retention Chains<\/p>\n

Connect both shield-end chains to fixed points on tractor and implement. Taut enough to prevent rotation, with slack for movement.<\/p>\n<\/div>\n

\n
5<\/div>\n

Initial and Periodic Greasing<\/p>\n

2\u20133 pumps EP2 per cross-kit nipple at installation. Regrease every 8 hours; every 4 hours in wet or abrasive conditions.<\/p>\n<\/div>\n<\/div>\n

Frequently Asked Questions<\/h2>\n
\n
\n
How do I know which T number to order?<\/div>\n
\n