{"id":543,"date":"2026-09-10T06:15:46","date_gmt":"2026-09-10T06:15:46","guid":{"rendered":"https:\/\/drivelines.net\/product\/t7-pto-drive-shaft-970-nm-agricultural-cardan-shaft\/"},"modified":"2026-09-10T06:15:46","modified_gmt":"2026-09-10T06:15:46","slug":"t7-pto-drive-shaft-970-nm-agricultural-cardan-shaft","status":"publish","type":"product","link":"https:\/\/drivelines.net\/pt\/produto\/t7-pto-drive-shaft-970-nm-agricultural-cardan-shaft\/","title":{"rendered":"Eixo cardan agr\u00edcola T7 com tomada de for\u00e7a (TTO) de 970 Nm"},"content":{"rendered":"
\n

<\/p>\n

\n
\n
<\/div>\n

970 Nm @ 540 rpm<\/p><\/div>\n

\n
<\/div>\n

1,800 Nm Peak Torque<\/p><\/div>\n

\n
<\/div>\n

60-80 hp<\/p><\/div>\n

\n
<\/div>\n

CE Certified<\/p><\/div>\n

\n
<\/div>\n

ISO 9001 \/ TS16949<\/p><\/div>\n

\n
<\/div>\n

MOQ 1 pc \u2014 LGPD Ready<\/p><\/div>\n<\/div>\n

T7 PTO Drive Shaft \u2014 Operating Torque Parameters<\/h2>\n
\"T<\/p>\n

Source: Jiukai Driveline Catalog \u2014 current series highlighted in orange<\/p>\n<\/div>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Series<\/th>\nCross mm<\/th>\nKw @540<\/th>\nPk @540<\/th>\nNm @540<\/th>\nKw @1000<\/th>\nPk @1000<\/th>\nNm @1000<\/th>\nMP Nm<\/th>\n<\/tr>\n<\/thead>\n
T1<\/td>\n22×54<\/td>\n12<\/td>\n16<\/td>\n210<\/td>\n18<\/td>\n25<\/td>\n172<\/td>\n320<\/td>\n<\/tr>\n
T2<\/td>\n23.8×61.3<\/td>\n15<\/td>\n21<\/td>\n270<\/td>\n23<\/td>\n31<\/td>\n220<\/td>\n450<\/td>\n<\/tr>\n
T3<\/td>\n27×70<\/td>\n22<\/td>\n30<\/td>\n390<\/td>\n35<\/td>\n47<\/td>\n330<\/td>\n640<\/td>\n<\/tr>\n
T4<\/td>\n27×74.6<\/td>\n26<\/td>\n35<\/td>\n460<\/td>\n40<\/td>\n55<\/td>\n380<\/td>\n780<\/td>\n<\/tr>\n
T5<\/td>\n30.2×80<\/td>\n35<\/td>\n47<\/td>\n620<\/td>\n54<\/td>\n74<\/td>\n520<\/td>\n1,050<\/td>\n<\/tr>\n
T6<\/td>\n30.2×92<\/td>\n47<\/td>\n64<\/td>\n830<\/td>\n74<\/td>\n100<\/td>\n710<\/td>\n1,450<\/td>\n<\/tr>\n
T7<\/td>\n30.2×106.5<\/td>\n55<\/td>\n75<\/td>\n970<\/td>\n87<\/td>\n118<\/td>\n830<\/td>\n1,800<\/td>\n<\/tr>\n
T7N<\/td>\n35×94<\/td>\n55<\/td>\n75<\/td>\n970<\/td>\n87<\/td>\n118<\/td>\n830<\/td>\n1,800<\/td>\n<\/tr>\n
T8<\/td>\n35×106.5<\/td>\n70<\/td>\n95<\/td>\n1,240<\/td>\n110<\/td>\n150<\/td>\n1,050<\/td>\n2,250<\/td>\n<\/tr>\n
T38<\/td>\n38×105.6<\/td>\n78<\/td>\n105<\/td>\n1,380<\/td>\n123<\/td>\n166<\/td>\n1,175<\/td>\n2,500<\/td>\n<\/tr>\n
T9<\/td>\n41×108<\/td>\n88<\/td>\n120<\/td>\n1,560<\/td>\n140<\/td>\n190<\/td>\n1,340<\/td>\n2,800<\/td>\n<\/tr>\n
T10<\/td>\n41×118<\/td>\n106<\/td>\n145<\/td>\n1,905<\/td>\n170<\/td>\n230<\/td>\n1,650<\/td>\n3,500<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

\n
\n
970 Nm<\/div>\n
Torque @ 540 rpm<\/div>\n<\/div>\n
\n
830 Nm<\/div>\n
Torque @ 1,000 rpm<\/div>\n<\/div>\n
\n
1,800 Nm<\/div>\n
Peak Torque (MP)<\/div>\n<\/div>\n
\n
55 Kw<\/div>\n
Power @ 540 rpm<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\nSeries: T7<\/span>
\nCross: 30.2×106.5 mm<\/span>
\n540 rpm: 55 Kw \/ 75 Pk \/ 970 Nm<\/span>
\n1,000 rpm: 87 Kw \/ 118 Pk \/ 830 Nm<\/span>
\nSteel: 20CrMnTi alloy<\/span>
\nSpline: 1-3\/8 Z6 \/ 1-3\/4 Z20<\/span>
\nShield: HDPE UV-stabilised<\/span>
\nGrease: EP2 lithium sealed<\/span>\n<\/div>\n
\"T7<\/div>\n

Overview<\/h2>\n
\n
⚙ Cross kit 7.01 (30.2×106.5) \u2014 Rated 970 Nm at 540 rpm<\/div>\n
⚡ Peak torque 1,800 Nm \u2014 For 60-80 hp tractors<\/div>\n
🔧 Forged alloy-steel yokes \u2014 Sealed needle-bearing cross kits (IP67)<\/div>\n
🛡 CE-compliant HDPE safety shield \u2014 included standard<\/div>\n
📐 Spline: 1-3\/8 Z6 (540 rpm) \u2014 1-3\/4 Z20 (1,000 rpm)<\/div>\n
🌎 CE + ISO 9001 \u2014 Brazil INMETRO \/ LGPD compliant<\/div>\n<\/div>\n

Product Description<\/h2>\n

T7 is the highest series sharing the 30.2 mm cross-kit pin diameter with T5 and T6, with a 106.5 mm journal length raising peak torque to 1,800 Nm. T7 is specified for the demanding combination of high continuous torque and high shaft speed seen in large balers and mower-conditioners on 60\u201380 hp tractors. For the full T Series PTO drive shaft range<\/a>, see our category page.<\/p>\n

T7 shafts are frequently specified by OEM implement manufacturers as the default driveline on baler and mower-conditioner models for 60\u201380 hp tractors. Many European baler and forage conditioner brands specify T7 as their standard drive shaft, creating a significant aftermarket requirement in Brazil as European equipment ages into the replacement cycle. Ever-Power Drive Line supplies T7 on an OEM custom-length basis to implement builders in Brazil and Argentina, with drawing-approval process and first-article inspection as standard.<\/p>\n

T7 is the highest series in the standard T range for which Ever-Power Drive Line holds spot stock in Brazil-focused distribution. T8, T9, and T10 are available on standard lead times but are less commonly held in regional buffer stock. This positioning means T7 replacement orders can be fulfilled faster than upper-series equivalents \u2014 commercially important for contractors who cannot predict shaft failure timing relative to their harvest schedule. Full CE, ISO 9001, and TS\/16949 documentation for Brazil INMETRO and LGPD compliance. For technical enquiries, contact Ever-Power Drive Line<\/a>.<\/p>\n

Assembly Diagram \u2014 Component Reference<\/h2>\n
\"T7<\/p>\n

Component reference numbers correspond to part codes in the table below<\/p>\n<\/div>\n

\n
1<\/span>Cross Joint<\/span><\/div>\n
2<\/span>Joint Simple (Outer)<\/span><\/div>\n
3<\/span>Joint Simple (Inner)<\/span><\/div>\n
4<\/span>Splined Yoke<\/span><\/div>\n
5<\/span>Tube Yoke (Outer)<\/span><\/div>\n
6<\/span>Tube Yoke (Inner)<\/span><\/div>\n
7<\/span>Outer Tube<\/span><\/div>\n
8<\/span>Inner Tube<\/span><\/div>\n<\/div>\n

Component Part Numbers \u2014 T7<\/h2>\n
\"T<\/p>\n

Source: Jiukai Driveline Catalog<\/p>\n<\/div>\n

\n\n\n\n\n\n\n\n\n\n
Component<\/th>\nOuter \/ Outboard<\/th>\nInner \/ Inboard<\/th>\n<\/tr>\n<\/thead>\n
Cross Kit<\/td>\n7.01 (Ø30.2×106.5)<\/td>\n<\/tr>\n
Joint Simple<\/td>\n7.0505B+7.01+7.06<\/td>\n7.0505B+7.01+7.07<\/td>\n<\/tr>\n
Splined Yoke<\/td>\n7.0505B<\/td>\n<\/tr>\n
Tube Yoke<\/td>\n7.06<\/td>\n7.07<\/td>\n<\/tr>\n
Tube<\/td>\n7.03<\/td>\n7.04<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Spline Profile Reference<\/h2>\n
\"PTO<\/p>\n

Left: 1-3\/8 inch 6-spline (Z6) for 540 rpm \u2014 Right: 1-3\/4 inch 20-spline (Z20) for 1,000 rpm<\/p>\n<\/div>\n

Key Features<\/h2>\n
\n
\n
<\/div>\n
\n

Heat-Treated Yoke Forgings<\/p>\n

Alloy steel drop-forgings, shot-blasted and heat-treated. Fatigue life exceeds 1 million cycles at rated torque in field conditions.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Triple-Lip Sealed Cross Joints<\/p>\n

Triple-lip internal seals block water, mud, and crop debris. Factory-greased EP2 lithium complex grease. Extended regreasing intervals.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

OECD Code 4 Safety Shield<\/p>\n

Bellows-style HDPE guard meets OECD Code 4 and CE Machinery Directive. Integrated chain anchor brackets at both shield ends.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Push-Pin Quick-Release Yokes<\/p>\n

1-3\/8 inch Z6 push-pin yoke standard; 1-3\/4 inch Z20 and bolt-clamp options stocked. Lever-release for fast implement changes.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Custom OEM Manufacturing<\/p>\n

Non-standard lengths and alternative yoke profiles manufactured to customer drawing. First-article approval process standard.<\/p>\n<\/div>\n<\/div>\n

\n
<\/div>\n
\n

Traceable Quality Records<\/p>\n

Dimensional inspection records, torque test samples, and paint adhesion verification per batch. Full traceability for import compliance.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

Typical Applications<\/h2>\n
\n
\n

Large Round and Square Balers<\/p>\n

Heavy baling duty on 60\u201380 hp tractors. T7 is a common OEM specification on European baler models for this power class.<\/p>\n<\/div>\n

\n

Forage Conditioners<\/p>\n

Mower-conditioner roller drive at high speed and high cycle rate. T7 provides correct fatigue margin for continuous conditioning roller operation.<\/p>\n<\/div>\n

\n

Agricultural Pump Stations<\/p>\n

High-capacity pump drive for continuous 540 or 1,000 rpm. T7 suitable for 55\u201375 kW pump units in large-scale irrigation systems.<\/p>\n<\/div>\n<\/div>\n

Installation and Maintenance<\/h2>\n
\"PTO<\/p>\n

Attach safety chain to a fixed non-rotating point on both tractor and implement<\/p>\n<\/div>\n

\n
\n
1<\/div>\n

Select the Correct Series<\/p>\n

Use the torque table to select the series rated above your PTO output by at least 20%. Verify cross-kit size matches yoke seats.<\/p>\n<\/div>\n

\n
2<\/div>\n

Check Working Lengths<\/p>\n

Connect implement and raise to max height. Inner tube must overlap outer by 50 mm min. Lower: check 80 mm engagement remains.<\/p>\n<\/div>\n

\n
3<\/div>\n

Install Yoke Connections<\/p>\n

Push splined yoke fully onto tractor PTO; push-pin clicks into groove. Pull rearward to confirm retention. Repeat at implement end.<\/p>\n<\/div>\n

\n
4<\/div>\n

Attach Shield Retention Chains<\/p>\n

Connect both shield-end chains to fixed points on tractor and implement. Taut enough to prevent rotation, with slack for movement.<\/p>\n<\/div>\n

\n
5<\/div>\n

Initial and Periodic Greasing<\/p>\n

2\u20133 pumps EP2 per cross-kit nipple at installation. Regrease every 8 hours; every 4 hours in wet or abrasive conditions.<\/p>\n<\/div>\n<\/div>\n

Frequently Asked Questions<\/h2>\n
\n
\n
How do I know which T number to order?<\/div>\n
\n