விளக்கம்
1,905 Nm @ 540 rpm
80° Max CV Joint Angle
120–200 hp
Wide Angle CV Joint
Constant Velocity Output
CE Certified / ISO 9001
MOQ 1 pc — LGPD Ready
G50 PTO Drive Shaft — Wide Angle Operating Torque
Source: Ever-Power Drive Line G Series Catalog — current series highlighted
| தொடர் | குறுக்கு மிமீ | கிலோவாட் @540 | பிகே @540 | Nm @540 | கிலோவாட் @1000 | பிகே @1000 | Nm @1000 | எம்.பி. என்.எம். | Max Angle |
|---|---|---|---|---|---|---|---|---|---|
| G2 | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 | 80° |
| G4 | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 | 80° |
| G5 | 30.2×80 | 35 | 47 | 590 | 54 | 74 | 510 | 960 | 80° |
| G6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 | 80° |
| G7 | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 | 80° |
| G8 | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 | 80° |
| G38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 | 80° |
| G42 | 42×104.5 | 79 | 107 | 1,400 | 122 | 166 | 1,175 | 2,500 | 80° |
| G50 | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 | 80° |
கண்ணோட்டம்
தயாரிப்பு விளக்கம்
G50 is the top of the G Series — a 41×118 mm cross-kit CV joint cardan shaft delivering 1,905 Nm at 540 rpm at angles up to 80 degrees. The 41 mm cross-kit pin diameter is unique to G50 in the G Series and is shared with T10 and S10. Workshop tooling for G50 service is the same as T10 and S10 — 41 mm pressing fixtures and snap-ring pliers. No additional tooling investment is required for workshops already servicing T10 or S10.
At this torque class, the choice between G50 (CV joint) and T10/S10 (standard cardan) is determined by the implement operating angle requirement alone. Both transmit identical power. Both use the same 41×118 mm cross kit. G50 is specified when the application requires high-angle constant-velocity operation that T10 or S10 standard cardan joints cannot provide without vibration.
G50 is the highest-specification G Series model. Stock availability confirmation is strongly recommended before committing to a delivery schedule. For OEM contracts at G50 class, எவர்-பவர் டிரைவ் லைனைத் தொடர்பு கொள்ளவும் to discuss blanket order terms and engineering review for custom configurations.
G Series vs Standard Cardan Shaft — G50 Comparison
| Feature | G Series (This Shaft) | T / L / S Series |
|---|---|---|
| Joint Type | CV Wide Angle Joint | Standard Cardan Joint |
| Max Operating Angle | 80° (CV end) | 25° continuous |
| Velocity Output | Constant velocity | Cyclic variation above 6° |
| Vibration at High Angles | Zero — eliminated | Increases with angle |
| Torque Class | 1,905 Nm @540 rpm | Equivalent T10 / S10 |
| கிராஸ் கிட் | 41×118 mm | Same as equivalent T/S Series |
| Cross Kit Cross-Reference | Shared with T10 / S10 | As labelled |
Assembly Diagram — Component Reference
Component 1 is the CV wide angle joint — the key G Series differentiator from T/L/S Series
☈ Component 1: CV Wide Angle Joint
The CV (constant velocity) joint replaces the standard cross joint at the tractor end. It uses a ball-and-socket mechanism to deliver perfectly smooth, constant-velocity output at angles up to 80 degrees — eliminating the speed fluctuation that standard cardan joints produce above 6 degrees.
Component Part Numbers — G50
Source: Ever-Power Drive Line G Series Catalog
| கூறு | வெளிப்புற / வெளிப்பக்க | உள் / உட்புறம் |
|---|---|---|
| CV Wide Angle Joint | 10.01 (Ø41×118 mm) | — |
| கூட்டு எளிமையானது | g50.01B+g50.01+g50.06 | g50.01B+g50.01+g50.07 |
| ஸ்ப்ளைன்ட் யோக் | g50.01B | — |
| குழாய் நுகம் | g50.06 | g50.07 |
| குழாய் | g50.03 | g50.04 |
ஸ்ப்லைன் சுயவிவரக் குறிப்பு
Left: 1-3/8 inch Z6 (540 rpm) — Right: 1-3/4 inch Z20 (1,000 rpm)
முக்கிய அம்சங்கள்
80° Wide Angle CV Joint
The G Series CV joint allows operation at angles up to 80 degrees at the tractor end — more than three times the 25-degree limit of standard T, L, and S Series cardan joints. This enables G Series shafts in front-mounted implement drives, close-coupled mounts, and any application where the shaft angle regularly exceeds the standard cardan limit.
Constant Velocity Output
Standard cardan joints produce a sinusoidal speed variation at the output — the output shaft rotates faster then slower with each revolution, proportional to the operating angle. The G Series CV joint eliminates this variation, delivering perfectly constant-velocity output at any angle up to 80 degrees. This prevents vibration and eliminates implement gearbox acceleration fatigue.
Sealed Cross-Kit Bearings — IP67
Double-lip sealed needle-roller cross-kit bearing cups at the implement end, factory-filled with EP2 lithium complex grease. Grease nipple accessible with shield in place. Rated for 350+ hours between maintenance interventions under normal field conditions.
CE Safety Shield — Standard
CE-marked UV-stabilised HDPE bellows guard. CV joint end fitted with a flexible boot that accommodates the full 80-degree joint movement while protecting the CV joint grease cavity from contamination. OECD Code 4 compliant. Included as standard with every G Series unit.
Forged 20CrMnTi Steel Yokes
Drop-forged chromium-manganese-titanium alloy steel yokes, normalised and induction-hardened at bearing seat journals. The high-angle CV joint body is machined from the same alloy to the same surface hardness specification.
CE + ISO Certification Package
CE Declaration of Conformity, ISO 9001:2015, TS/16949 process certificate, LGPD compliance documentation. SGS third-party batch inspection available on contract orders.
பொதுவான பயன்பாடுகள்
G Series CV joint — 120–200 hp tractor class at operating angles up to 80°
Maximum-Output Forage Harvesters — Wide Angle
G50 delivers the maximum G Series torque (1,905 Nm) with CV joint constant-velocity output for the largest forage harvesters in the 120–200 hp class where the implement hitch geometry requires angles beyond the standard T10/S10 cardan joint limit.
Large Square Balers — 140–200 hp High-Angle
High-output large square balers on the most powerful agricultural tractors where the baler hitch configuration requires CV joint operation at the maximum torque class available.
Industrial Heavy-Duty Wide-Angle Drive
Heavy-duty industrial wood chipper, mulcher, and processing equipment requiring the maximum G Series torque with constant-velocity output at high operating angles.
நிறுவுதல் மற்றும் பராமரிப்பு
Inspect the CV joint boot and anchor safety chains at both ends before first use
Confirm Torque Class
Calculate implement torque demand + 20% margin. Select the lowest G Series that meets the adjusted Nm figure.
Verify Operating Angle
Measure the maximum shaft angle at the tractor end at all implement positions. G Series handles up to 80° at the CV end; 25° at the implement cardan end.
Adjust Working Length
Verify 50 mm tube overlap at max implement height; 80 mm engagement at minimum. Tubes must not bottom out.
Inspect CV Joint Boot
Before first use, confirm the CV boot is correctly seated and both clamps are tight. A loose boot causes immediate CV joint contamination.
Anchor Safety Chains and Engage
Connect safety chains to non-rotating points. Engage PTO at low throttle first to verify smooth CV joint operation before running at full speed.
அடிக்கடி கேட்கப்படும் கேள்விகள்
- —G50 and T10 share the identical 41×118 mm cross kit and torque ratings
- —G50 has a CV joint — 80 degree max angle, constant velocity output
- —T10 has a standard cardan joint — 25 degree max continuous angle
- —Use G50 when operating angle exceeds 25 degrees at this maximum torque class
- —Yes — G50 uses the same 41 mm pin diameter tooling as T10 and S10
- —No additional tooling investment for workshops already equipped for T10 or S10 service
- —Cross kits are also identical — one 41×118 mm part number covers G50, T10, and S10
- —MOQ 1 piece from stock in standard lengths — confirm availability first
- —OEM custom configurations: MOQ 20 pieces, lead time 30–35 days
- —Blanket order arrangements available for annual contract volumes
- —Double CV at both ends available as OEM option
- —Allows up to 80 degrees simultaneously at both tractor and implement ends
- —MOQ 20 pieces; lead time 35–40 days — contact Ever-Power Drive Line for specifications
- —CE Declaration of Conformity per EU Machinery Directive 2006/42/EC
- —ISO 9001:2015, TS/16949, SGS inspection available
- —LGPD compliance documentation included with commercial invoice
வாடிக்கையாளர் மதிப்புரைகள்
Gustavo N.
Mato Grosso, Brazil — Forage Harvesting Contractor
★★★★★
- G50 eliminated CV joint angle vibration on our largest forage harvester — T10 was failing at high turns
- 41 mm tooling already in stock from T10 service — zero additional investment
- CE documentation complete — Santos customs clearance accepted on first submission
Mariana L.
Goiânia, Brazil — Agricultural OEM
★★★★★
- G50 selected for our heavy-duty wide-angle rotary drive where T10 vibration caused implement gearbox failures
- OEM order processed within 28 days including first-article inspection
- Cross-kit interchangeability with T10 confirmed — simplifies our after-sales parts program
தொடர்புடைய தயாரிப்புகள்
அனுப்புதல் மற்றும் ஆர்டர் தகவல்
குறைந்தபட்ச ஆர்டர் அளவு
1 துண்டு (இருப்பு)
50 துண்டுகள் (விருப்பத்திற்கேற்ப)
முன்னணி நேரம்
7–10 days (stock)
25–30 days (custom)
கப்பல் பயணம்
கடல் வழியாக LCL/FCL பிரேசிலுக்கு
விமான சரக்கு போக்குவரத்து வசதி உள்ளது
வர்த்தக விதிமுறைகள்
FOB நிங்போ / ஷாங்காய்
CIF சாண்டோஸ் கிடைக்கிறது
சான்றிதழ்கள்
CE சான்றிதழ் பெற்றது
ISO 9001:2015
TS/16949
எஸ்ஜிஎஸ் ஆய்வுLGPD இணக்கமானது
OECD குறியீடு 4 கவசம்
