Açıklama
695 Nm @ 540 rpm
1,200 Nm Peak Torque
50–75 hp
Lemon Tube Profile
CE Certified
ISO 9001 / TS16949
MOQ 1 pc — LGPD Ready
L32 PTO Drive Shaft — Operating Torque Parameters
Source: Ever-Power Drive Line L Series Catalog — current series highlighted in orange
| Seri | Cross mm | Kw @540 | Pk @540 | Nm @540 | Kw @1000 | Pk @1000 | Nm @1000 | MP Nm |
|---|---|---|---|---|---|---|---|---|
| L1 | 22×54 | 12 | 16 | 210 | 18 | 25 | 172 | 320 |
| L2 | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 |
| L3 | 27×70 | 22 | 30 | 390 | 35 | 47 | 330 | 640 |
| L4 | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 |
| L5 | 30.2×80 | 35 | 47 | 970 | 54 | 74 | 520 | 1,050 |
| L6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| L32 | 32×76 | 39 | 53 | 695 | 61 | 83 | 580 | 1,200 |
Overview
Product Description
L32 steps to the 35 mm cross-kit pin diameter — a significant increase from the 30.2 mm of L6. The 35×94 mm cross kit (code 7.01) delivers 1,050 Nm at 540 rpm and 1,900 Nm peak, placing L32 in the same torque class as T7N. Like T7N, L32 uses a different tube outer diameter from the lower L Series models to fit specific high-torque implement input housings that require a lemon profile but cannot accommodate the L6 tube at this power level.
The L32 designation reflects the 32-series cross-kit heritage used in European agricultural shaft standards (Bondioli & Pavesi B07 equivalent cross dimensions). For B2B buyers sourcing replacement shafts for European-specified implements, L32 is the correct technical designation — it maps directly to the B07/series 7 classification used in European OEM parts documentation, making cross-reference straightforward for European equipment service workshops operating in South America.
L32 is the top of the standard L Series range from Ever-Power Drive Line. For applications exceeding 1,050 Nm at 540 rpm on lemon tube specification, contact the Ever-Power Drive Line engineering team to discuss L Series heavy-duty or T Series T8/T9 alternatives. For standard L32 orders, contact us with your hitch dimensions and spline specification.
Assembly Diagram — Component Reference
Component reference numbers correspond to part codes in the table below
Component Part Numbers — L32
Source: Ever-Power Drive Line L Series Catalog
| Component | Outer / Outboard | Inner / Inboard |
|---|---|---|
| Cross Kit | 32.01 (Ø32×76) | |
| Joint Simple | l32.02B+l32.01+l32.06 | l32.02B+l32.01+l32.07 |
| Splined Yoke | l32.02B | |
| Tube Yoke | l32.06 | l32.07 |
| Lemon Tube | l32.03 | l32.04 |
Spline Profile Reference
Left: 1-3/8 inch 6-spline (Z6) for 540 rpm — Right: 1-3/4 inch 20-spline (Z20) for 1,000 rpm
Key Features
Lemon Tube Profile — Compact OD
The lemon (elliptical) tube profile reduces the outer diameter of the telescoping assembly relative to triangular-tube T Series at the same torque class. Fits European OEM implement input housings that exclude triangular tube geometry.
Sealed Cross-Kit Bearings — IP67
Double-lip sealed needle-roller bearing cups, factory-filled with EP2 lithium complex grease. Grease nipple accessible with shield fitted. Designed for 350+ hours between maintenance interventions in normal field conditions.
CE Safety Shield — Standard
CE-marked UV-stabilised HDPE bellows guard. Yellow for field visibility. Spring-clip anchors and chain points at both ends. OECD Code 4 compliant. Supplied as standard on every L Series unit.
Forged 20CrMnTi Steel Yokes
Drop-forged chromium-manganese-titanium alloy steel, normalised and induction-hardened at bearing seat journals. Designed for high peak-load applications without premature bearing seat wear.
All Spline Standards Available
1-3/8 inch 6-spline (ISO 500 Z6), 1-3/4 inch 20-spline (Z20), and 1-3/8 inch 21-spline (Z21). Clamp yoke and push-pin locking both available. Both ends specified independently at order.
CE + ISO Certification Package
CE Declaration of Conformity, ISO 9001:2015, TS/16949 process certificate, and LGPD compliance documentation standard with every shipment. SGS third-party inspection available on contract orders.
Typical Applications
Typical L32 application in 50–75 hp tractor class
Large Square Baler Feeders
Feeder rotor and knotter drive on compact square balers in the 60–90 hp class. L32 handles the 1,900 Nm peak eject load with the lemon tube profile specified by several European square baler OEM lines.
Heavy-Duty Forage Harvesters
Flywheel and feed roller drive on pull-type forage harvesters. Continuous 1,050 Nm operation with high inertia peaks. Sealed L32 cross kits outperform open-bearing equivalents in sustained harvest duty.
Large Mower-Conditioners — 60–90 hp
Disc mower-conditioner main drive where the implement housing excludes the T7 triangular tube. L32 delivers the same torque class as T7N in the lemon tube profile required by this implement category.
Installation and Maintenance
Attach safety chain to a fixed non-rotating point on both tractor and implement
Confirm Torque Class
Match implement demand (Nm) against the table above. Add 20% margin. Select the lowest L Series that meets the adjusted figure.
Adjust Working Length
Measure coupling centre distance with implement attached. Verify 50 mm min tube overlap at full extension, 80 mm at full compression.
Engage Yoke Connections
Push-pin yoke: engage at tractor PTO stub and confirm audible click and positive retention. Clamp yoke: torque to manufacturer specification.
Anchor Safety Chains
Connect tractor-side chain to guard or tractor frame; implement-side chain to implement body. Verify taut with implement at working level.
Grease Before First Use
Apply EP2 lithium complex NLGI 2 grease (2–3 pumps) to both cross-kit nipples. Service every 8 hours. Reduce to 4 hours in wet or abrasive conditions.
Frequently Asked Questions
- —L32 and T7N share the same torque class (1,050 Nm at 540 rpm, 1,900 Nm peak)
- —Tube profiles differ: L32 uses lemon, T7N uses triangular — they are not interchangeable at the implement housing
- —Cross-kit pin diameter: L32 uses 35 mm (35×94 mm); T7N uses 35 mm (35×94 mm) — identical cross kits
- —Select L32 for implements specifying lemon tube; select T7N for implements specifying triangular tube
- —Yes — the L32 35×94 mm cross kit is dimensionally equivalent to the B07 series in European catalog standards
- —For cross-reference ordering, specify 35×94 mm with double-lip sealed cups
- —Ever-Power Drive Line supplies these under code 7.01 — specify when ordering
- —Wide-angle CV joints for L32 lemon tube are available as OEM order option
- —Standard cardan joint max angle: 25 degrees continuous; CV joint: up to 50 degrees
- —MOQ 20 pieces; lead time 30–35 days — contact the technical team for specifications
- —L32 is rated for implements up to 1,050 Nm at 540 rpm continuous demand
- —At 90 hp tractor output, L32 continuous torque provides a 25% safety margin over 840 Nm implement demand
- —For implements demanding more than 1,050 Nm, consider T8 (1,240 Nm) or T9 (1,560 Nm) in triangular tube
- —Individual units packed in cardboard with foam end protection and rust-inhibiting wrapping
- —Bulk orders: palletised in wooden crates with internal dunnage; 20 ft container capacity approximately 400 units
- —Incoterms: FOB Ningbo or Shanghai; CIF Santos available; DDP on request for large contracts
Customer Reviews
Eduardo S.
Rio Grande do Sul, Brazil — Square Baler Service Centre
★★★★★
- L32 is now our stock replacement shaft for all European-spec large round and square balers
- 35×94 mm cross kit cross-references correctly to the B07 spec in all European OEM parts books
- No adaptation required — lemon tube fits all the housings that refused T7N triangular tubes
Camila P.
Curitiba, Brazil — Forage Harvester Importer
★★★★★
- Specified L32 on a fleet of 12 pull-type harvesters — 800-hour service life confirmed in dense corn silage
- CE and ISO documentation complete on first shipment — customs clearance at Santos was straightforward
- Will move L32 to annual blanket order from next season
Related Products
Shipping and Order Information
MOQ
1 pc (stock)
50 pcs (custom)
Lead Time
7–10 days (stock)
25–30 days (custom)
Shipping
Sea LCL/FCL to Brazil
Air freight available
Trade Terms
FOB Ningbo / Shanghai
CIF Santos available
Sertifikalar
CE Certified
ISO 9001:2015
TS/16949
SGS InspectionLGPD Compliant
OECD Code 4 Shield
