説明
830 Nm @ 540 rpm
80° Max CV Joint Angle
45–70 hp
Wide Angle CV Joint
Constant Velocity Output
CE Certified / ISO 9001
最小注文数量1個 — LGPD対応
G6 PTO Drive Shaft — Wide Angle Operating Torque
Source: Ever-Power Drive Line G Series Catalog — current series highlighted
| シリーズ | クロスmm | kW @540 | Pk @540 | Nm @540 | 1000kW | PK @1000 | Nm @1000 | MP Nm | Max Angle |
|---|---|---|---|---|---|---|---|---|---|
| G2 | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 | 80° |
| G4 | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 | 80° |
| G5 | 30.2×80 | 35 | 47 | 590 | 54 | 74 | 510 | 960 | 80° |
| G6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 | 80° |
| G7 | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 | 80° |
| G8 | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 | 80° |
| G38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 | 80° |
| G42 | 42×104.5 | 79 | 107 | 1,400 | 122 | 166 | 1,175 | 2,500 | 80° |
| G50 | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 | 80° |
概要
製品説明
G6 steps up from G5 with the extended 30.2×92 mm cross kit — delivering 830 Nm at 540 rpm in constant-velocity form. This is the wide-angle CV equivalent of T6, L6, and S6 — same cross-kit pin diameter (30.2 mm), same torque class, but with the CV joint at the tractor end providing smooth constant-velocity output at angles up to 80 degrees rather than the 25-degree limit of standard cardan joints.
At this torque class, G6 is the standard recommendation for discbine mower-conditioners in the 55–70 hp class where implement OEMs specify CV joint PTO drive. Several European discbine manufacturers include G6 as the specified original shaft on their 55–70 hp models — if the implement parts book references G6 or a CV joint wide-angle shaft at this torque class, G6 is the correct replacement.
G6 shares the 30.2 mm cross-kit tooling family with G5, G7, T5, T6, T7, L5, and L6. One set of 30.2 mm pressing tools covers all of these series. For the complete series comparison and availability, see the G Series category page.
G Series vs Standard Cardan Shaft — G6 Comparison
| Feature | G Series (This Shaft) | T / L / S Series |
|---|---|---|
| Joint Type | CV Wide Angle Joint | 標準カルダンジョイント |
| Max Operating Angle | 80° (CV end) | 25° continuous |
| Velocity Output | Constant velocity | Cyclic variation above 6° |
| Vibration at High Angles | Zero — eliminated | Increases with angle |
| Torque Class | 830 Nm @540 rpm | Equivalent T6 / L6 / S6 |
| クロスキット | 30.2×92 mm | Same as equivalent T/S Series |
| Cross Kit Cross-Reference | Shared with T6 / L6 / S6 | As labelled |
組立図 - 部品参照
Component 1 is the CV wide angle joint — the key G Series differentiator from T/L/S Series
☈ Component 1: CV Wide Angle Joint
The CV (constant velocity) joint replaces the standard cross joint at the tractor end. It uses a ball-and-socket mechanism to deliver perfectly smooth, constant-velocity output at angles up to 80 degrees — eliminating the speed fluctuation that standard cardan joints produce above 6 degrees.
Component Part Numbers — G6
Source: Ever-Power Drive Line G Series Catalog
| 成分 | 外側／船外機 | 内側／インボード |
|---|---|---|
| CV Wide Angle Joint | 6.01 (Ø30.2×92 mm) | — |
| ジョイント シンプル | g6.01B+g6.01+g6.06 | g6.01B+g6.01+g6.07 |
| スプライン付きヨーク | g6.01B | — |
| チューブヨーク | g6.06 | g6.07 |
| Tube | g6.03 | g6.04 |
スプラインプロファイル参照
左：1-3/8インチ Z6（540rpm）— 右：1-3/4インチ Z20（1,000rpm）
主な機能
80° Wide Angle CV Joint
The G Series CV joint allows operation at angles up to 80 degrees at the tractor end — more than three times the 25-degree limit of standard T, L, and S Series cardan joints. This enables G Series shafts in front-mounted implement drives, close-coupled mounts, and any application where the shaft angle regularly exceeds the standard cardan limit.
Constant Velocity Output
Standard cardan joints produce a sinusoidal speed variation at the output — the output shaft rotates faster then slower with each revolution, proportional to the operating angle. The G Series CV joint eliminates this variation, delivering perfectly constant-velocity output at any angle up to 80 degrees. This prevents vibration and eliminates implement gearbox acceleration fatigue.
密閉型クロスキットベアリング — IP67
Double-lip sealed needle-roller cross-kit bearing cups at the implement end, factory-filled with EP2 lithium complex grease. Grease nipple accessible with shield in place. Rated for 350+ hours between maintenance interventions under normal field conditions.
CE安全シールド - 標準
CE-marked UV-stabilised HDPE bellows guard. CV joint end fitted with a flexible boot that accommodates the full 80-degree joint movement while protecting the CV joint grease cavity from contamination. OECD Code 4 compliant. Included as standard with every G Series unit.
鍛造20CrMnTi鋼製ヨーク
Drop-forged chromium-manganese-titanium alloy steel yokes, normalised and induction-hardened at bearing seat journals. The high-angle CV joint body is machined from the same alloy to the same surface hardness specification.
CE + ISO認証パッケージ
CE適合宣言書、ISO 9001:2015、TS/16949プロセス証明書、LGPD準拠文書。契約注文については、SGSによる第三者機関のバッチ検査も可能です。
代表的な用途
G Series CV joint — 45–70 hp tractor class at operating angles up to 80°
Large Discbine Mower-Conditioners — 50–70 hp
High-output discbine mower-conditioners on 55–70 hp tractors where the implement is run through full-field turns without PTO disengagement. G6 CV joint eliminates vibration at angles that cause T6 or S6 cardan shaft issues.
Front-Mounted Disc Mowers
Large front-mounted disc mowers on 50–70 hp tractors requiring constant-velocity PTO drive at angles up to 80 degrees during manoeuvring.
Wide-Angle Slurry Pump Drive
PTO-driven slurry pump and separator drives where the pump position relative to the tractor creates sustained high-angle PTO shaft operation. G6 continuous-duty CV performance at 830 Nm with no angle-induced vibration.
設置およびメンテナンス
Inspect the CV joint boot and anchor safety chains at both ends before first use
トルククラスを確認してください
Calculate implement torque demand + 20% margin. Select the lowest G Series that meets the adjusted Nm figure.
Verify Operating Angle
Measure the maximum shaft angle at the tractor end at all implement positions. G Series handles up to 80° at the CV end; 25° at the implement cardan end.
作業長さを調整する
Verify 50 mm tube overlap at max implement height; 80 mm engagement at minimum. Tubes must not bottom out.
Inspect CV Joint Boot
Before first use, confirm the CV boot is correctly seated and both clamps are tight. A loose boot causes immediate CV joint contamination.
Anchor Safety Chains and Engage
Connect safety chains to non-rotating points. Engage PTO at low throttle first to verify smooth CV joint operation before running at full speed.
よくある質問
- —S6 uses a standard cardan joint (star tube, 25 degree max angle) — G6 uses a CV joint (80 degree max angle)
- —Both share the same torque class (830 Nm at 540 rpm) and the same 30.2×92 mm cross-kit dimensions
- —Use S6 for star-bore implement housings within normal angle range; use G6 for high-angle applications
- —Yes — G6 is rated at 710 Nm at 1,000 rpm
- —CV joint constant-velocity output is maintained at 1,000 rpm up to 80 degrees
- —Specify Z20 spline for 1,000 rpm; standard stock is Z6 (540 rpm)
- —The CV joint has its own grease boot — inspect the boot at every seasonal service
- —A torn boot must be replaced immediately; the cross kit at the implement end is greased on the standard 8-hour interval
- —CV joint pre-packed grease does not require periodic regreasing unless the boot is replaced
- —Disassemble the CV joint assembly per the G Series installation guide
- —Clean all old grease from the joint cavity and ball tracks
- —Pack the new boot with the specified CV joint grease (included with replacement boot kit)
- —Refit and secure both boot clamps — verify correct positioning through the full angle range
- —Yes — G6 sealed IP67 cross kits are suitable for continuous-duty pump applications
- —Use the 4-hour greasing interval for the cross kit at the implement end in continuous-duty pump applications
- —The CV joint grease boot protects the CV cavity independently — no additional maintenance required at the CV end
お客様の声
Fernando O.
Paraná, Brazil — Discbine Distributor
★★★★★
- G6 is now our standard PTO shaft for all 55–70 hp discbine installations
- CV joint performance at full turning angles completely eliminated the vibration complaints from T6 installations
- CE and ISO documentation consistent and complete across all shipments
Isabella C.
São Paulo, Brazil — Agricultural Parts Wholesaler
★★★★★
- Stocked G6 alongside T6 after OEM discbine specifications started requiring CV joint shafts
- Cross-kit part number identical to T6 — one stock code covers both series
- Four shipments of 15 units each — quality consistent, documentation complete every time
関連製品
配送および注文情報
最小注文数量
1個（在庫あり）
50個（カスタム）
リードタイム
7～10日（在庫あり）
25～30日（カスタム対応）
配送
海上LCL/FCLでブラジルへ
航空貨物輸送可能
取引条件
FOB 寧波 / 上海
CIFサントス利用可能
資格認定
CE認証取得済み
ISO 9001:2015
TS/16949
SGS検査LGPD準拠
OECDコード4シールド
