Description
695 Nm @ 540 rpm
1,200 Nm Peak Torque
50–75 hp
Star Tube Profile
CE Certified
ISO 9001 / TS16949
MOQ 1 pc — LGPD Ready
S32 PTO Drive Shaft — Operating Torque Parameters
Source: Ever-Power Drive Line S Series Catalog — current series highlighted in orange
| Series | Cross mm | Kw @540 | Pk @540 | Nm @540 | Kw @1000 | Pk @1000 | Nm @1000 | MP Nm |
|---|---|---|---|---|---|---|---|---|
| S6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| S7 | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| S8 | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 |
| S38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 |
| S32 | 32×76 | 39 | 53 | 695 | 61 | 83 | 580 | 1,200 |
| S36 | 36×89 | 66 | 90 | 1,175 | 102 | 139 | 975 | 2,000 |
| S9 | 41×108 | 88 | 120 | 1,560 | 140 | 190 | 1,340 | 2,800 |
| S10 | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 |
| S42 | 42×104.5 | 79 | 107 | 1,400 | 122 | 166 | 1,175 | 2,500 |
Overview
Product Description
S32 occupies the transitional torque position between the 30.2 mm family (S6/S7) and the 35 mm family (S8/S9). Its 32×76 mm cross kit delivers 695 Nm at 540 rpm and 1,200 Nm peak — higher than S6 (830 Nm is S6, but lower peak) and overlapping S7 in the continuous rating, but with the 32 mm pin diameter required by specific European implement housings that fall between the standard 30.2 mm and 35 mm families.
The S32 designation reflects the 32 mm pin diameter cross kit — a specification used in European agricultural shaft standards (Bondioli and Pavesi catalog cross-reference). For B2B buyers sourcing replacement shafts for European-specified implements, S32 maps directly to this cross-kit family, simplifying parts cross-reference for European equipment service workshops operating in South America.
S32 and L32 are direct tube-profile alternatives to each other: same cross-kit dimensions (32×76 mm), different tube profiles (star vs lemon). The selection criterion is the implement housing bore specification. S32 stocks alongside L32 at Ever-Power Drive Line for distributors serving mixed star and lemon tube implement fleets. For current stock availability and OEM enquiries, contact us.
Assembly Diagram — Component Reference
Component reference numbers correspond to part codes in the table below
Component Part Numbers — S32
Source: Ever-Power Drive Line S Series Catalog
| Component | Outer / Outboard | Inner / Inboard |
|---|---|---|
| Cross Kit | 32.01 (Ø32×76 mm) | |
| Joint Simple | s32.01B+s32.01+s32.06 | s32.01B+s32.01+s32.07 |
| Splined Yoke | s32.01B | |
| Tube Yoke | s32.06 | s32.07 |
| Star Tube | s32.03 | s32.04 |
Spline Profile Reference
Left: 1-3/8 inch Z6 (540 rpm) — Right: 1-3/4 inch Z20 (1,000 rpm)
Key Features
Star Tube Profile — Six-Lobe Bore
The star (six-lobe) tube cross-section provides the highest torsional rigidity per unit outer diameter of any standard agricultural PTO tube profile. Specified by European implement OEMs for input housings machined to star bore dimensions — incompatible with triangular or lemon tube profiles.
Sealed Cross-Kit Bearings — IP67
Double-lip sealed needle-roller bearing cups, factory-filled with EP2 lithium complex grease. Grease nipple accessible with shield in place. Rated for 350+ hours between maintenance interventions in standard field conditions.
CE Safety Shield — Standard
CE-marked UV-stabilised HDPE bellows guard matched to S Series tube outer diameter. Spring-clip anchors and chain points at both ends. OECD Code 4 compliant. Included as standard with every S Series unit.
Forged 20CrMnTi Steel Yokes
Drop-forged chromium-manganese-titanium alloy steel yokes, normalised and induction-hardened at bearing seat journals. Designed for sustained peak torque applications in large baler and forage harvester duty cycles.
All Spline Standards Available
1-3/8 inch Z6 (540 rpm), 1-3/4 inch Z20 (1,000 rpm), and 1-3/8 inch Z21 push-pin or bolt-clamp yokes. Both ends specified independently at order.
CE + ISO Certification Package
CE Declaration of Conformity, ISO 9001:2015, TS/16949 process certificate, LGPD compliance documentation. SGS third-party batch inspection available on contract orders.
Typical Applications
S Series star tube — 50–75 hp tractor class applications
Compact Round Balers — Star Bore
S32 is the star tube equivalent of the L32 lemon tube series — same cross-kit dimensions, different tube profile. Specified for European compact round baler housings machined for star bore input.
Mid-Size Mower-Conditioners
Disc mower-conditioner main drive on 55–70 hp tractors where the implement OEM specifies the 32 mm pin diameter star tube series as the transition class between the 30.2 mm and 35 mm families.
Heavy Hay Tedders and Rakes
Large-rotor tedders and finger rakes requiring sustained 695 Nm in the star tube profile. S32 covers the gap between S7 (30.2×106.5 mm) and S8 (35×94 mm) for specific implement housing dimensions.
Installation and Maintenance
Attach safety chain to a fixed non-rotating point on both tractor and implement
Confirm Torque Class
Calculate implement demand (Nm). Add 20% safety margin. Select the lowest S Series where Nm@540 (or Nm@1000) exceeds the adjusted figure.
Adjust Working Length
Measure coupling centre distance with implement attached. Verify 50 mm min tube overlap at full extension, 80 mm at full compression.
Engage Yoke Connections
Push-pin yoke: engage at PTO stub and confirm audible click and positive retention. Clamp yoke: torque to manufacturer specification.
Anchor Safety Chains
Connect tractor-side chain to guard or frame; implement-side chain to implement body. Verify taut at working height.
Grease Before First Use
Apply EP2 lithium complex NLGI 2 grease (2–3 pumps) to both cross-kit nipples. Service every 8 hours; 4 hours in wet or abrasive conditions.
Frequently Asked Questions
- —S32 and L32 share the same 32×76 mm cross-kit dimensions and identical torque ratings (695 Nm at 540 rpm)
- —Tube profiles differ: S32 uses star bore, L32 uses lemon (elliptical) bore
- —Star and lemon tube profiles are not interchangeable at the implement input housing
- —Select S32 when the implement manual specifies star tube; select L32 for lemon tube
- —S32 sits between S6 (830 Nm) and S7 (970 Nm) in continuous torque
- —But S32 uses a different pin diameter (32 mm vs 30.2 mm) — it is a parallel specification, not an intermediate step
- —S32 is selected when the implement housing specifically requires the 32 mm star bore profile
- —Yes — S32 32×76 mm cross kit maps to the Bondioli and Pavesi / GKN series 32 specification
- —Order from Ever-Power Drive Line by code 32.01 (Ø32×76 mm) with double-lip sealed cups
- —MOQ 1 piece for replacement cross kits
- —S32 is rated at 580 Nm at 1,000 rpm
- —Verify implement demand does not exceed 580 Nm at 1,000 rpm before selecting S32
- —Specify Z20 yokes for 1,000 rpm; standard stock is Z6 (540 rpm)
- —CE Declaration of Conformity, ISO 9001:2015, TS/16949 — standard with every unit
- —OECD Code 4 safety shield compliance included in CE declaration
- —SGS third-party batch inspection available for contract orders on request
Customer Reviews
André P.
Rio Grande do Sul, Brazil — Hay Equipment Distributor
★★★★★
- S32 is our replacement shaft for all European-spec tedders and rakes that specify 32 mm star bore
- Cross-kit dimensions confirmed identical to the OEM parts book specification
- CE documentation accepted across all Brazilian customer submissions without supplementary paperwork
Beatriz M.
Santiago, Chile — Farm Machinery Importer
★★★★★
- Stocked S32 alongside L32 after European OEM customers specified both star and lemon tube versions
- First order of 25 units: consistent dimensions, complete documentation, 9-day delivery to Santiago port
- Will add to annual blanket order alongside T Series
Related Products
Shipping and Order Information
MOQ
1 pc (stock)
50 pcs (custom)
Lead Time
7–10 days (stock)
25–30 days (custom)
Shipping
Sea LCL/FCL to Brazil
Air freight available
Trade Terms
FOB Ningbo / Shanghai
CIF Santos available
Certifications
CE Certified
ISO 9001:2015
TS/16949
SGS InspectionLGPD Compliant
OECD Code 4 Shield
Technical Specifications
| Parameter | @ 540 rpm | @ 1,000 rpm |
|---|---|---|
| Power (Kw) | 39 | 61 |
| Peak Power (Pk) | 53 | 83 |
| Continuous Torque (Nm) | 695 | 580 |
| Peak Torque MP (Nm) | 1,200 | 1,200 |
| Cross Kit | 32×76 mm | 32×76 mm |
| HP Range | 50–75 hp | 50–75 hp |
| Tube Profile | Star Tube (6-lobe) | Star Tube (6-lobe) |
| Spline Standard | 1-3/8″ Z6 (std) / 1-3/4″ Z20 | 1-3/8″ Z6 / 1-3/4″ Z20 |
| Bearing Seal | IP67 Double-lip sealed | IP67 Double-lip sealed |
| Grease Spec | EP2 Lithium Complex NLGI 2 | EP2 Lithium Complex NLGI 2 |
| Safety Shield | HDPE CE-certified, UV-stabilised | HDPE CE-certified, UV-stabilised |
| Material | 20CrMnTi alloy steel, forged | 20CrMnTi alloy steel, forged |
MOQ — Minimum Order Quantity
Lead Time
Trade Terms (Incoterms)
Standard terms: EXW | FOB | CIF | DAP
On request: FCA | CFR | CPT | CIP | DDP
DDP is not offered as a default. Available for select destinations on request. “DDP worldwide” is not written on product pages.
Manufacturer & Supplier Information
Request a Quote or Sample
S32 PTO Drive Shaft — Request a Quote or Sample
Send your tractor model, implement type, PTO speed, and required quantity. We confirm series, spline profile, shaft length, lead time, and price within 24 hours. New customers may request 1–5 pcs samples at sample price before committing to full order volume.
