Описание
970 Nm @ 540 rpm
1,800 Nm Peak Torque
60-80 hp
Сертифицировано CE
ISO 9001 / TS16949
MOQ 1 pc — LGPD Ready
T7 PTO Drive Shaft — Operating Torque Parameters
Source: Jiukai Driveline Catalog — current series highlighted in orange
| Ряд | Поперечный мм | кВт при 540 | Pk @540 | Нм @540 | кВт при 1000 | Pk @1000 | Нм @1000 | МП Нм |
|---|---|---|---|---|---|---|---|---|
| Т1 | 22×54 | 12 | 16 | 210 | 18 | 25 | 172 | 320 |
| Т2 | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 |
| Т3 | 27×70 | 22 | 30 | 390 | 35 | 47 | 330 | 640 |
| Т4 | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 |
| Т5 | 30.2×80 | 35 | 47 | 620 | 54 | 74 | 520 | 1,050 |
| Т6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| Т7 | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| T7N | 35×94 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| Т8 | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 |
| T38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 |
| Т9 | 41×108 | 88 | 120 | 1,560 | 140 | 190 | 1,340 | 2,800 |
| Т10 | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 |
Cross: 30.2×106.5 mm
540 rpm: 55 Kw / 75 Pk / 970 Nm
1,000 rpm: 87 Kw / 118 Pk / 830 Nm
Сталь: сплав 20CrMnTi
Шлицевое соединение: 1-3/8 Z6 / 1-3/4 Z20
Защитный слой: полиэтилен высокой плотности (HDPE), устойчивый к УФ-излучению.
Смазка: литиевая EP2, герметичная.
Обзор
Описание продукта
T7 is the highest series sharing the 30.2 mm cross-kit pin diameter with T5 and T6, with a 106.5 mm journal length raising peak torque to 1,800 Nm. T7 is specified for the demanding combination of high continuous torque and high shaft speed seen in large balers and mower-conditioners on 60–80 hp tractors. For the full T Series PTO drive shaft range, see our category page.
T7 shafts are frequently specified by OEM implement manufacturers as the default driveline on baler and mower-conditioner models for 60–80 hp tractors. Many European baler and forage conditioner brands specify T7 as their standard drive shaft, creating a significant aftermarket requirement in Brazil as European equipment ages into the replacement cycle. Ever-Power Drive Line supplies T7 on an OEM custom-length basis to implement builders in Brazil and Argentina, with drawing-approval process and first-article inspection as standard.
T7 is the highest series in the standard T range for which Ever-Power Drive Line holds spot stock in Brazil-focused distribution. T8, T9, and T10 are available on standard lead times but are less commonly held in regional buffer stock. This positioning means T7 replacement orders can be fulfilled faster than upper-series equivalents — commercially important for contractors who cannot predict shaft failure timing relative to their harvest schedule. Full CE, ISO 9001, and TS/16949 documentation for Brazil INMETRO and LGPD compliance. For technical enquiries, свяжитесь с компанией Ever-Power Drive Line.
Assembly Diagram — Component Reference
Номера компонентов соответствуют кодам деталей в таблице ниже.
Component Part Numbers — T7
Source: Jiukai Driveline Catalog
| Компонент | Внешний / Подвесной | Внутренний / Внутренний |
|---|---|---|
| Cross Kit | 7.01 (Ø30.2×106.5) | |
| Простой совместный | 7.0505B+7.01+7.06 | 7.0505B+7.01+7.07 |
| Шлицевая хомута | 7.0505B | |
| Трубчатое ярмо | 7.06 | 7.07 |
| Трубка | 7.03 | 7.04 |
Справочный профиль сплайна
Left: 1-3/8 inch 6-spline (Z6) for 540 rpm — Right: 1-3/4 inch 20-spline (Z20) for 1,000 rpm
Основные характеристики
Heat-Treated Yoke Forgings
Alloy steel drop-forgings, shot-blasted and heat-treated. Fatigue life exceeds 1 million cycles at rated torque in field conditions.
Triple-Lip Sealed Cross Joints
Triple-lip internal seals block water, mud, and crop debris. Factory-greased EP2 lithium complex grease. Extended regreasing intervals.
OECD Code 4 Safety Shield
Bellows-style HDPE guard meets OECD Code 4 and CE Machinery Directive. Integrated chain anchor brackets at both shield ends.
Push-Pin Quick-Release Yokes
1-3/8 inch Z6 push-pin yoke standard; 1-3/4 inch Z20 and bolt-clamp options stocked. Lever-release for fast implement changes.
Custom OEM Manufacturing
Non-standard lengths and alternative yoke profiles manufactured to customer drawing. First-article approval process standard.
Traceable Quality Records
Dimensional inspection records, torque test samples, and paint adhesion verification per batch. Full traceability for import compliance.
Типичные области применения
Large Round and Square Balers
Heavy baling duty on 60–80 hp tractors. T7 is a common OEM specification on European baler models for this power class.
Forage Conditioners
Mower-conditioner roller drive at high speed and high cycle rate. T7 provides correct fatigue margin for continuous conditioning roller operation.
Agricultural Pump Stations
High-capacity pump drive for continuous 540 or 1,000 rpm. T7 suitable for 55–75 kW pump units in large-scale irrigation systems.
Монтаж и техническое обслуживание
Прикрепите страховочную цепь к неподвижной неподвижной точке на тракторе и навесном оборудовании.
Select the Correct Series
Use the torque table to select the series rated above your PTO output by at least 20%. Verify cross-kit size matches yoke seats.
Check Working Lengths
Connect implement and raise to max height. Inner tube must overlap outer by 50 mm min. Lower: check 80 mm engagement remains.
Install Yoke Connections
Push splined yoke fully onto tractor PTO; push-pin clicks into groove. Pull rearward to confirm retention. Repeat at implement end.
Attach Shield Retention Chains
Connect both shield-end chains to fixed points on tractor and implement. Taut enough to prevent rotation, with slack for movement.
Initial and Periodic Greasing
2–3 pumps EP2 per cross-kit nipple at installation. Regrease every 8 hours; every 4 hours in wet or abrasive conditions.
Часто задаваемые вопросы
- —Check the operating torque table for the Nm rating at your PTO speed
- —Your series must be rated above the implement’s maximum demand by at least 20%
- —If in doubt, size up — running an undersized shaft causes premature cross-kit failure
- —Yes — a CE-compliant HDPE safety shield is included as standard on every shaft
- —The shield meets EU Machinery Directive 2006/42/EC and OECD Code 4 requirements
- —Safety chain attachment brackets are integrated at both shield ends
- —Yes — cross kits, shields, push pins, safety chains, and grease nipples all stocked
- —Order cross kits by the part number shown in the component table on this page
- —Replacing a worn cross kit on-site takes approximately 30 minutes with basic tools
- —Stock series: MOQ is 1 piece — suitable for maintenance and replacement buyers
- —Custom lengths and special profiles: MOQ 50 pieces per specification
- —Volume pricing available for orders of 50 pieces and above — contact us for a quote
- —Stock series: 7–10 days from order confirmation to dispatch
- —Sea freight LCL to Santos port typically adds 20–25 days transit
- —Air freight available for urgent orders — contact us to arrange
Отзывы покупателей
Joao P.
Parana, Brazil — Implement Manufacturer
★★★★☆
- Running this shaft as primary drive on our round baler production line
- Custom length order with drawing review — fit geometry exactly on first article
- Minor shield colour inconsistency on first batch; corrected without dispute on next
Alejandro V.
Buenos Aires, Argentina — Agricultural Importer
★★★★★
- Top seller in our compact-tractor segment this season
- Shield compliance ready for tightening local PTO guard regulations
- Technical responses from Ever-Power sales team accurate and fast
Сопутствующие товары
Информация о доставке и заказе
Минимальный объем заказа
1 шт. (в наличии)
50 шт. (на заказ)
Время выполнения
7–10 days (stock)
25–30 days (custom)
Перевозки
Морской контейнерный/контейнерный контейнерный транспорт в Бразилию
Возможна авиаперевозка.
Условия торговли
FOB Нинбо/Шанхай
Доступно по условиям CIF Сантос
Сертификаты
Сертифицировано CE
ISO 9001:2015
TS/16949
Инспекция SGSСоответствует требованиям LGPD.
Защитный экран кода 4 ОЭСР
