விளக்கம்
270 Nm @ 540 rpm
450 Nm Peak Torque
16–25 hp
Lemon Tube Profile
CE சான்றிதழ் பெற்றது
ISO 9001 / TS16949
MOQ 1 pc — LGPD Ready
L2 PTO Drive Shaft — Operating Torque Parameters
Source: Ever-Power Drive Line L Series Catalog — current series highlighted in orange
| தொடர் | குறுக்கு மிமீ | கிலோவாட் @540 | பிகே @540 | Nm @540 | கிலோவாட் @1000 | பிகே @1000 | Nm @1000 | எம்.பி. என்.எம். |
|---|---|---|---|---|---|---|---|---|
| L1 | 22×54 | 12 | 16 | 210 | 18 | 25 | 172 | 320 |
| L2 | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 |
| L3 | 27×70 | 22 | 30 | 390 | 35 | 47 | 330 | 640 |
| L4 | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 |
| L5 | 30.2×80 | 35 | 47 | 970 | 54 | 74 | 520 | 1,050 |
| L6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| L32 | 32×76 | 39 | 53 | 695 | 61 | 83 | 580 | 1,200 |
கண்ணோட்டம்
தயாரிப்பு விளக்கம்
L2 steps up from L1 with a 23.8×61.3 mm cross kit delivering 280 Nm at 540 rpm and a 500 Nm peak — sufficient for rotary tiller start-up inertia peaks on tractors up to 25 hp. The lemon tube profile is retained at the same outer footprint as L1, making L2 the first choice for upgrades where L1 is failing prematurely under heavy-soil tilling conditions without requiring a larger implement input housing.
The 23.8 mm cross-kit pin diameter is unique to L2 — it is not shared with any T Series model. This means L2 cross-kit replacement parts are ordered exclusively by the L2 series code. The bearing cup dimensions differ from both L1 (22 mm pin) and L3 (27 mm pin), and substitution of cross kits between these series is not possible even though all three use lemon tube profiles.
L2 is stocked in the most common agricultural shaft lengths. For compact tractor OEM contracts — implement builders fitting the L2 as standard on 18–25 hp equipment — custom lengths are available from MOQ 50 pieces at 25–30 days lead time with full DWG review and first-article inspection. See the full range on the L Series product page.
Assembly Diagram — Component Reference
கூறு குறிப்பு எண்கள், கீழே உள்ள அட்டவணையில் உள்ள பாகக் குறியீடுகளுடன் பொருந்துகின்றன.
Component Part Numbers — L2
Source: Ever-Power Drive Line L Series Catalog
| கூறு | வெளிப்புற / வெளிப்பக்க | உள் / உட்புறம் |
|---|---|---|
| கிராஸ் கிட் | 2.01 (Ø23.8×61.3) | |
| கூட்டு எளிமையானது | l2.02B+l2.01+l2.06 | l2.02B+l2.01+l2.07 |
| ஸ்ப்ளைன்ட் யோக் | l2.02B | |
| குழாய் நுகம் | l2.06 | l2.07 |
| Lemon Tube | l2.03 | l2.04 |
ஸ்ப்லைன் சுயவிவரக் குறிப்பு
Left: 1-3/8 inch 6-spline (Z6) for 540 rpm — Right: 1-3/4 inch 20-spline (Z20) for 1,000 rpm
முக்கிய அம்சங்கள்
Lemon Tube Profile — Compact OD
The lemon (elliptical) tube profile reduces the outer diameter of the telescoping assembly relative to triangular-tube T Series at the same torque class. Fits European OEM implement input housings that exclude triangular tube geometry.
Sealed Cross-Kit Bearings — IP67
Double-lip sealed needle-roller bearing cups, factory-filled with EP2 lithium complex grease. Grease nipple accessible with shield fitted. Designed for 350+ hours between maintenance interventions in normal field conditions.
CE Safety Shield — Standard
CE-marked UV-stabilised HDPE bellows guard. Yellow for field visibility. Spring-clip anchors and chain points at both ends. OECD Code 4 compliant. Supplied as standard on every L Series unit.
Forged 20CrMnTi Steel Yokes
Drop-forged chromium-manganese-titanium alloy steel, normalised and induction-hardened at bearing seat journals. Designed for high peak-load applications without premature bearing seat wear.
All Spline Standards Available
1-3/8 inch 6-spline (ISO 500 Z6), 1-3/4 inch 20-spline (Z20), and 1-3/8 inch 21-spline (Z21). Clamp yoke and push-pin locking both available. Both ends specified independently at order.
CE + ISO Certification Package
CE Declaration of Conformity, ISO 9001:2015, TS/16949 process certificate, and LGPD compliance documentation standard with every shipment. SGS third-party inspection available on contract orders.
பொதுவான பயன்பாடுகள்
Typical L2 application in 16–25 hp tractor class
Rotary Tillers — 16–25 hp
L2 covers the common 1.2–1.4 m tiller range on compact utility tractors. The 23.8×61.3 mm cross kit handles the high-inertia start-up torque of tiller tine assemblies at 540 rpm without exceeding the lemon tube bending envelope.
Lawn and Paddock Mowers
Finish mowers and rough-cut mowers up to 1.4 m. The L2 lemon tube stays within the mower deck shaft tunnel on compact OEM mower designs that the L3 triangular profile cannot enter.
Fertiliser Spreaders
PTO-driven broadcast spreaders on 18–25 hp tractors. Moderate continuous torque, low shock loading — well within L2 rated capacity. Commonly fitted as OEM standard on compact European spreader brands.
நிறுவுதல் மற்றும் பராமரிப்பு
டிராக்டர் மற்றும் கருவி ஆகிய இரண்டிலும், சுழலாத ஒரு நிலையான புள்ளியில் பாதுகாப்புச் சங்கிலியைப் பொருத்தவும்.
Confirm Torque Class
Match implement demand (Nm) against the table above. Add 20% margin. Select the lowest L Series that meets the adjusted figure.
Adjust Working Length
Measure coupling centre distance with implement attached. Verify 50 mm min tube overlap at full extension, 80 mm at full compression.
Engage Yoke Connections
Push-pin yoke: engage at tractor PTO stub and confirm audible click and positive retention. Clamp yoke: torque to manufacturer specification.
Anchor Safety Chains
Connect tractor-side chain to guard or tractor frame; implement-side chain to implement body. Verify taut with implement at working level.
முதல் பயன்பாட்டிற்கு முன் கிரீஸ் தடவவும்
Apply EP2 lithium complex NLGI 2 grease (2–3 pumps) to both cross-kit nipples. Service every 8 hours. Reduce to 4 hours in wet or abrasive conditions.
அடிக்கடி கேட்கப்படும் கேள்விகள்
- —Yes — if L1 cross-kit life is shorter than expected, L2 is the first upgrade option
- —Verify that the implement input housing accepts the L2 lemon tube outer diameter before ordering
- —L2 cross-kit pin diameter (23.8 mm) differs from L1 (22 mm) — cross kits are not interchangeable
- —L2 cross kit code: 2.01 (Ø23.8×61.3 mm)
- —This code is unique to L2 — not shared with any T Series or other L Series model
- —Order by series code to guarantee correct journal length and bearing cup fit
- —Standard interval: every 8 operating hours with EP2 lithium complex NLGI 2 grease
- —Reduce to every 4 hours in waterlogged soils, sandy abrasive conditions, or wet harvest periods
- —Apply 2–3 pump strokes per nipple — both cross kits must be serviced at each interval
- —Yes — bolt-clamp yokes are available for both tractor and implement ends on request
- —Specify yoke type at order; standard stock is push-pin (quick-release locking pin)
- —Bolt-clamp adds 3–5 days to lead time for stock orders; included in custom lead time
- —Electrostatic powder-coat in agricultural yellow as standard
- —Yoke bearing seats and tube interior are rust-inhibiting oil-coated before assembly
- —Salt-spray tested to 120 hours per ISO 9227 as part of outgoing inspection
வாடிக்கையாளர் மதிப்புரைகள்
Rodrigo F.
Rio Grande do Sul, Brazil — Implement Manufacturer
★★★★★
- L2 passed our 300-hour tilling test in clay soils without cross-kit replacement
- The lemon tube fits our compact tiller housing where the T Series tube required machining
- CE documentation arrived with the first shipment — no customs query on import
Ana C.
Buenos Aires, Argentina — Tractor Dealer
★★★★★
- Specified L2 as the replacement for a competitor shaft on a customer’s 20 hp tractor
- Push-pin yoke engagement was smooth and secure — no retention issue after 200 hours
- Will order a standing stock of L1 and L2 for service parts
தொடர்புடைய தயாரிப்புகள்
அனுப்புதல் மற்றும் ஆர்டர் தகவல்
குறைந்தபட்ச ஆர்டர் அளவு
1 துண்டு (இருப்பு)
50 துண்டுகள் (விருப்பத்திற்கேற்ப)
முன்னணி நேரம்
7–10 days (stock)
25–30 days (custom)
கப்பல் பயணம்
கடல் வழியாக LCL/FCL பிரேசிலுக்கு
விமான சரக்கு போக்குவரத்து வசதி உள்ளது
வர்த்தக விதிமுறைகள்
FOB நிங்போ / ஷாங்காய்
CIF சாண்டோஸ் கிடைக்கிறது
சான்றிதழ்கள்
CE சான்றிதழ் பெற்றது
ISO 9001:2015
TS/16949
எஸ்ஜிஎஸ் ஆய்வுLGPD இணக்கமானது
OECD குறியீடு 4 கவசம்
