Опис
1,905 Nm @ 540 rpm
3,500 Nm Peak Torque
120–200 hp
Star Tube Profile
Сертифіковано CE
ISO 9001 / TS16949
Мінімальна замовна ціна 1 шт. — Готовий до використання LGPD
S10 PTO Drive Shaft — Operating Torque Parameters
Source: Ever-Power Drive Line S Series Catalog — current series highlighted in orange
| Серія | Хрест мм | кВт @540 | Пак @540 | Нм @540 | кВт @1000 | Пакет @1000 | Нм @1000 | МП Нм |
|---|---|---|---|---|---|---|---|---|
| S6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| S7 | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| S8 | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 |
| S38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 |
| S32 | 32×76 | 39 | 53 | 695 | 61 | 83 | 580 | 1,200 |
| S36 | 36×89 | 66 | 90 | 1,175 | 102 | 139 | 975 | 2,000 |
| S9 | 41×108 | 88 | 120 | 1,560 | 140 | 190 | 1,340 | 2,800 |
| S10 | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 |
| S42 | 42×104.5 | 79 | 107 | 1,400 | 122 | 166 | 1,175 | 2,500 |
Огляд
Опис продукту
S10 is the top of the S Series — a 41×118 mm cross-kit shaft delivering 1,905 Nm at 540 rpm and 3,500 Nm peak. The 41 mm cross-kit pin diameter is unique to S10 in the S Series; no other S Series model uses this bearing family. Workshop tooling (pressing fixtures, snap-ring pliers, and bearing cups) is specific to S10 and separate from the 30.2 mm and 35 mm tool sets used for lower series. S10 is also available in the equivalent T Series as T10 — the tube profile (star vs triangular) is the only selection criterion between them for a given implement housing specification.
At this torque class, the selection between S10 (star) and T10 (triangular) is entirely determined by the implement input housing design. Both transmit identical power and share the same cross-kit dimensions. If the implement housing is machined for a star bore, S10 is correct; if triangular, T10 is correct. Never substitute tube profiles at this torque class — the mechanical consequences of incorrect tube engagement in a high-torque housing are severe.
S10 is available from stock in standard lengths. For the largest OEM applications — custom compressed length, integrated CV joint, specific yoke configuration — lead time is 25–30 days from DWG approval with MOQ 50 pieces. Contact Привідна лінія Ever-Power for engineering review and pricing on S10 OEM contracts.
Схема складання — Довідник компонентів
Component reference numbers correspond to part codes in the table below
Component Part Numbers — S10
Source: Ever-Power Drive Line S Series Catalog
| Компонент | Зовнішній / Підвісний | Внутрішній / Внутрішній борт |
|---|---|---|
| Комплект для кросу | 10.01 (Ø41×118 mm) | |
| Простий суглоб | s10.01B+s10.01+s10.06 | s10.01B+s10.01+s10.07 |
| Шлицьова вилка | s10.01B | |
| Трубчасте ярмо | s10.06 | s10.07 |
| Star Tube | s10.03 | s10.04 |
Довідка про профіль сплайну
Ліворуч: 1-3/8 дюйма Z6 (540 об/хв) — Праворуч: 1-3/4 дюйма Z20 (1000 об/хв)
Основні характеристики
Star Tube Profile — Six-Lobe Bore
The star (six-lobe) tube cross-section provides the highest torsional rigidity per unit outer diameter of any standard agricultural PTO tube profile. Specified by European implement OEMs for input housings machined to star bore dimensions — incompatible with triangular or lemon tube profiles.
Герметичні підшипники Cross-Kit — IP67
Double-lip sealed needle-roller bearing cups, factory-filled with EP2 lithium complex grease. Grease nipple accessible with shield in place. Rated for 350+ hours between maintenance interventions in standard field conditions.
Захисний екран CE — стандарт
CE-marked UV-stabilised HDPE bellows guard matched to S Series tube outer diameter. Spring-clip anchors and chain points at both ends. OECD Code 4 compliant. Included as standard with every S Series unit.
Ковані сталеві хомути 20CrMnTi
Drop-forged chromium-manganese-titanium alloy steel yokes, normalised and induction-hardened at bearing seat journals. Designed for sustained peak torque applications in large baler and forage harvester duty cycles.
All Spline Standards Available
1-3/8 inch Z6 (540 rpm), 1-3/4 inch Z20 (1,000 rpm), and 1-3/8 inch Z21 push-pin or bolt-clamp yokes. Both ends specified independently at order.
Пакет сертифікації CE + ISO
Декларація відповідності CE, сертифікат ISO 9001:2015, процес TS/16949, документація про відповідність LGPD. Контроль партій SGS третьою стороною доступний за контрактними замовленнями.
Типові застосування
S Series star tube — 120–200 hp tractor class applications
Maximum Output Forage Harvesters
Self-loading forage wagons and pull-type precision harvesters on the largest available tractors. S10 delivers 1,905 Nm at 540 rpm — the maximum capacity in the standard S Series — for sustained flywheel and rotor drive in high-density crop conditions.
Large Square Balers — 120–160 hp
High-density large square baler plunger drive on 120–160 hp tractors. The 41 mm cross-kit pin diameter and 118 mm journal provide the bearing capacity required for the 3,500 Nm peak loads of high-output square baling.
Industrial PTO Applications — Heavy Duty
Heavy-duty industrial rotary cutters, large wood chippers, and agricultural processing equipment requiring the maximum available star tube torque class at either 540 or 1,000 rpm PTO.
Встановлення та обслуговування
Attach safety chain to a fixed non-rotating point on both tractor and implement
Підтвердьте клас крутного моменту
Calculate implement demand (Nm). Add 20% safety margin. Select the lowest S Series where Nm@540 (or Nm@1000) exceeds the adjusted figure.
Налаштуйте робочу довжину
Measure coupling centre distance with implement attached. Verify 50 mm min tube overlap at full extension, 80 mm at full compression.
Engage Yoke Connections
Push-pin yoke: engage at PTO stub and confirm audible click and positive retention. Clamp yoke: torque to manufacturer specification.
Anchor Safety Chains
Connect tractor-side chain to guard or frame; implement-side chain to implement body. Verify taut at working height.
Grease Before First Use
Apply EP2 lithium complex NLGI 2 grease (2–3 pumps) to both cross-kit nipples. Service every 8 hours; 4 hours in wet or abrasive conditions.
Часті запитання
- —S10 and T10 share the same 41×118 mm cross kit and identical torque ratings (1,905 Nm at 540 rpm)
- —Tube profile differs: S10 uses star bore, T10 uses triangular (trilobe) bore
- —Selection is determined entirely by implement input housing specification — never substitute
- —Cross kits are interchangeable; tube and yoke assemblies are not
- —Yes — Z20 (1-3/4 inch 20-spline) yokes are available for both ends
- —At 1,000 rpm, S10 is rated at 1,610 Nm — verify implement demand against this figure
- —Specify Z20 at order; standard stock is Z6 (540 rpm)
- —41 mm pressing tool and snap-ring pliers for the S10 yoke bore
- —This tooling is specific to S10 — not compatible with 30.2 mm or 35 mm tools
- —Bearing cup installation requires a press or vise with 41 mm adapter — do not hammer-install
- —MOQ 1 piece from stock in standard lengths
- —OEM custom configurations: MOQ 50 pieces, lead time 25–30 days from DWG approval
- —For contract volumes above 200 pieces per year, contact Ever-Power Drive Line for blanket order pricing
- —A shear bolt torque limiter is strongly recommended for all S10 applications
- —Set the release torque below 3,500 Nm (S10 peak) to protect the shaft and implement gearbox
- —At this torque class, implement gearbox repair costs significantly exceed shaft replacement costs — a limiter is essential investment protection
Відгуки клієнтів
Gustavo N.
Mato Grosso, Brazil — Forage Harvesting Contractor
★★★★★
- S10 is the only shaft in this torque class that fits our European harvester star-bore input housing
- 800-hour service life confirmed in dense corn silage — no cross-kit replacement required in that period
- CE and ISO documentation complete — Santos customs clearance accepted all certificates on first submission
Mariana L.
Goiânia, Brazil — Agricultural OEM
★★★★★
- S10 selected for our new heavy-duty rotary cutter line after T10 triangular tube was incompatible with our housing design
- OEM custom length order processed in 28 days — DWG review and first-article inspection both completed within lead time
- Quality consistent with approved sample across the full production run of 60 pieces
Супутні товари
Інформація про доставку та замовлення
Мінімальна кількість замовлення
1 шт. (в наявності)
50 шт. (на замовлення)
Час виконання
7–10 днів (в наявності)
25–30 днів (на замовлення)
Доставка
Морські збірні/контейнерні контейнери (LCL/FCL) до Бразилії
Доступні авіаперевезення
Торговельні умови
FOB Нінбо / Шанхай
Доступні CIF Сантос
Сертифікати
Сертифіковано CE
ISO 9001:2015
TS/16949
Інспекція SGSВідповідність LGPD
Щит Кодексу 4 ОЕСР
Technical Specifications
| Parameter | @ 540 rpm | @ 1,000 rpm |
|---|---|---|
| Power (Kw) | 106 | 170 |
| Peak Power (Pk) | 145 | 230 |
| Continuous Torque (Nm) | 1,905 | 1,650 |
| Peak Torque MP (Nm) | 3,500 | 3,500 |
| Комплект для кросу | 41×118 mm | 41×118 mm |
| Діапазон HP | 120–200 hp | 120–200 hp |
| Tube Profile | Star Tube (6-lobe) | Star Tube (6-lobe) |
| Spline Standard | 1-3/8″ Z6 (std) / 1-3/4″ Z20 | 1-3/8″ Z6 / 1-3/4″ Z20 |
| Bearing Seal | IP67 Double-lip sealed | IP67 Double-lip sealed |
| Grease Spec | EP2 Lithium Complex NLGI 2 | EP2 Lithium Complex NLGI 2 |
| Safety Shield | HDPE CE-certified, UV-stabilised | HDPE CE-certified, UV-stabilised |
| Material | 20CrMnTi alloy steel, forged | 20CrMnTi alloy steel, forged |
MOQ — Minimum Order Quantity
Час виконання
Trade Terms (Incoterms)
Standard terms: EXW | FOB | CIF | DAP
On request: FCA | CFR | CPT | CIP | DDP
DDP is not offered as a default. Available for select destinations on request. “DDP worldwide” is not written on product pages.
Manufacturer & Supplier Information
Request a Quote or Sample
S10 PTO Drive Shaft — Request a Quote or Sample
Send your tractor model, implement type, PTO speed, and required quantity. We confirm series, spline profile, shaft length, lead time, and price within 24 hours. New customers may request 1–5 pcs samples at sample price before committing to full order volume.
