توضیحات
1,560 Nm @ 540 rpm
2,800 Nm Peak Torque
100-140 hp
CE Certified
ISO 9001 / TS16949
MOQ 1 pc — LGPD Ready
T9 PTO Drive Shaft — Operating Torque Parameters
Source: Jiukai Driveline Catalog — current series highlighted in orange
| سری | Cross mm | کیلو وات @540 | Pk @540 | نیوتن متر @540 | کیلووات @ 1000 | Pk @1000 | نیوتن متر @1000 | MP Nm |
|---|---|---|---|---|---|---|---|---|
| تی۱ | 22×54 | 12 | 16 | 210 | 18 | 25 | 172 | 320 |
| تی۲ | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 |
| تی۳ | 27×70 | 22 | 30 | 390 | 35 | 47 | 330 | 640 |
| تی۴ | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 |
| تی۵ | 30.2×80 | 35 | 47 | 620 | 54 | 74 | 520 | 1,050 |
| تی۶ | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| تی۷ | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| T7N | 35×94 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| تی۸ | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 |
| T38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 |
| تی۹ | 41×108 | 88 | 120 | 1,560 | 140 | 190 | 1,340 | 2,800 |
| تی۱۰ | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 |
Cross: 41×108 mm
540 rpm: 88 Kw / 120 Pk / 1,560 Nm
1,000 rpm: 140 Kw / 190 Pk / 1,340 Nm
Steel: 20CrMnTi alloy
Spline: 1-3/8 Z6 / 1-3/4 Z20
Shield: HDPE UV-stabilised
Grease: EP2 lithium sealed
Overview
Product Description
T9 uses the 41 mm cross-kit pin diameter — the largest in the T Series, shared with T10 — with a 108 mm journal delivering 1,560 Nm at 540 rpm and 2,800 Nm peak. T9 is specified for the heaviest agricultural applications short of industrial cardan shaft territory. For the full T Series PTO drive shaft range, see our category page.
T9 occupies a premium market segment where quality differentiation is most commercially significant. Contractors operating 120+ hp forage systems cannot afford shaft downtime during a harvest window. Ever-Power Drive Line T9 shafts are built to the same specification as European OEM supply, with sealed cross kits rated for continuous high-torque, high-speed loading. At the T9 torque level, the selection of a matched torque limiter becomes operationally critical — a forage harvester generating a 2,800 Nm peak during a crop slug without a limiter transmits the full peak directly to the tractor gearbox and rear axle.
T9 shafts in Brazil are primarily used in large commercial hay and silage operations in the south using 120–140 hp tractors with large balers or forage harvesters, and high-capacity centre-pivot irrigation systems where pump input power exceeds T8 capacity. The irrigation pump segment is growing in Mato Grosso and Goias as water-stressed crop production requires more intensive supplemental irrigation. T9 cross-kit servicing requires hydraulic press equipment rated to at least 5 tonnes. Full CE, ISO 9001, and TS/16949 documentation for Brazil INMETRO and LGPD compliance. For technical enquiries, contact Ever-Power Drive Line.
Assembly Diagram — Component Reference
Component reference numbers correspond to part codes in the table below
Component Part Numbers — T9
Source: Jiukai Driveline Catalog
| Component | Outer / Outboard | Inner / Inboard |
|---|---|---|
| Cross Kit | 9.01 (Ø41×108) | |
| Joint Simple | 9.0505B+9.01+9.06 | 9.0505B+9.01+9.07 |
| Splined Yoke | 9.0505B | |
| Tube Yoke | 9.06 | 9.07 |
| Tube | 9.03 | 9.04 |
Spline Profile Reference
Left: 1-3/8 inch 6-spline (Z6) for 540 rpm — Right: 1-3/4 inch 20-spline (Z20) for 1,000 rpm
Key Features
Forged Alloy Steel Yokes
Drop-forged 20CrMnTi, normalised and heat-treated. Fatigue-rated for continuous field loading without premature bearing seat wear.
Sealed Needle-Bearing Cross Kits
IP67-rated seals retain factory EP2 grease under heavy field contamination. Extended service intervals vs open-type cross kits.
CE Safety Shield Standard
HDPE bellows, UV-stabilised. Spring-clip end anchors and safety chain brackets. Meets EU Machinery Directive 2006/42/EC.
ISO / DIN Spline Profiles Stocked
1-3/8 inch Z6, 1-3/4 inch Z20, 1-3/8 inch Z21. Push-pin, taper-pin, and bolt-clamp locking all available.
OEM Custom Lengths
DXF/DWG drawing review before production. MOQ 50 pcs per specification. Lead time 25–30 days from approval.
Full Documentation Package
CE Declaration, ISO 9001 cert, dimensional drawings, batch test reports. Brazil INMETRO and LGPD compliant.
Typical Applications
High-Output Forage Harvesters
100–140 hp harvester drive for large-format pickup and cutter-blower combinations. T9 provides torque margin for multi-stream crop flow.
Large Square Balers
High-density square baling on 120–140 hp tractors. T9 peak torque 2,800 Nm covers dense bale compression and slug-load events.
High-Capacity Pump Stations
Upper-range agricultural PTO-driven pumps and compressors. T9 bridges agricultural and industrial driveline torque specifications.
Installation and Maintenance
Attach safety chain to a fixed non-rotating point on both tractor and implement
Confirm Series Rating
Match tractor PTO output torque at working RPM. Add 20% margin for shock loads. Check cross-kit seat diameter against yoke.
Verify Shaft Length
At max implement height: 50 mm inner tube engagement min. At min height: 80 mm min. Adjust before fitting.
Fit and Lock Yokes
Slide splined yoke onto PTO stub to push-pin engagement. Pull back lightly to confirm lock. Torque bolt-clamp yokes to spec.
Secure Safety Chains
Attach one chain end to tractor guard, other to implement frame. Taut but not load-bearing during normal articulation.
Grease at Installation
Apply 2–3 pumps EP2 grease at each cross-kit nipple before first use. Re-grease every 8 operating hours in the field.
Frequently Asked Questions
- —Check tractor PTO rated torque at your operating RPM from the operator manual
- —Choose the series where the Nm rating exceeds your PTO torque by at least 20%
- —Confirm the cross-kit seat diameter matches the yoke you are fitting
- —Yes — all T Series shafts are rated for both PTO speeds
- —Torque capacity at 1,000 rpm is lower for the same power input — verify in the comparison table
- —For 1,000 rpm stubs, confirm yoke spline is 1-3/4 inch Z20, not 1-3/8 inch Z6
- —Yes — cross kits are stocked individually by part number from the component table
- —Safety shields, push pins, safety chains, and grease nipples are also sold as spare parts
- —Field repair of cross kits is possible without replacing the full shaft assembly
- —CE Declaration of Conformity, ISO 9001, and TS/16949 certificates are standard
- —Dimensional drawings and batch test reports provided on request
- —All buyer data handling complies with Brazil LGPD — documentation supplied with sample order
- —Yes — specify compressed length, extended length, yoke profile, and shield type
- —DXF/DWG drawing review and approval before production run is standard
- —MOQ 50 pcs per specification; lead time 25–30 days from drawing approval
Customer Reviews
Ricardo M.
Mato Grosso, Brazil — Agricultural Contractor
★★★★★
- 20 units running on rotary mower fleet since start of harvest season
- 400 hours field operation — zero cross-kit failures recorded
- Competing local-sourced shafts were failing at 150 hours — clear service-life advantage
Carlos A.
Sao Paulo, Brazil — Farm Equipment Dealer
★★★★★
- Stocking this series as aftermarket replacement for multiple tractor brands
- CE documentation simplifies warranty handling with end customers
- Consistent part numbers and packaging across three consecutive orders
Related Products
Shipping and Order Information
MOQ
1 pc (stock)
50 pcs (custom)
Lead Time
7–10 days (stock)
25–30 days (custom)
Shipping
Sea LCL/FCL to Brazil
Air freight available
Trade Terms
FOB Ningbo / Shanghai
CIF Santos available
گواهینامهها
CE Certified
ایزو ۹۰۰۱:۲۰۱۵
تیاس/۱۶۹۴۹
SGS InspectionLGPD Compliant
OECD Code 4 Shield
