Description
270 Nm @ 540 rpm
450 Nm Peak Torque
15-25 hp
CE Certified
ISO 9001 / TS16949
MOQ 1 pc — LGPD Ready
T2 PTO Drive Shaft — Operating Torque Parameters
Source: Jiukai Driveline Catalog — current series highlighted in orange
| Series | Cross mm | Kw @540 | Pk @540 | Nm @540 | Kw @1000 | Pk @1000 | Nm @1000 | MP Nm |
|---|---|---|---|---|---|---|---|---|
| T1 | 22×54 | 12 | 16 | 210 | 18 | 25 | 172 | 320 |
| T2 | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 |
| T3 | 27×70 | 22 | 30 | 390 | 35 | 47 | 330 | 640 |
| T4 | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 |
| T5 | 30.2×80 | 35 | 47 | 620 | 54 | 74 | 520 | 1,050 |
| T6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| T7 | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| T7N | 35×94 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| T8 | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 |
| T38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 |
| T9 | 41×108 | 88 | 120 | 1,560 | 140 | 190 | 1,340 | 2,800 |
| T10 | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 |
Cross: 23.8×61.3 mm
540 rpm: 15 Kw / 21 Pk / 270 Nm
1,000 rpm: 23 Kw / 31 Pk / 220 Nm
Steel: 20CrMnTi alloy
Spline: 1-3/8 Z6 / 1-3/4 Z20
Shield: HDPE UV-stabilised
Grease: EP2 lithium sealed
Overview
Product Description
T2 is the first step up from T1, covering 15–25 hp compact tractors. The cross kit 2.01 (23.8×61.3 mm) provides 29% more torque than T1 while remaining compact for narrow-track orchard and vineyard tractors. T2 is the minimum series recommended for continuous-duty irrigation pump applications. For the full T Series PTO drive shaft range, see our category page.
The T2 PTO Drive Shaft is widely used in the Brazilian and Argentine small-farm market where compact utility tractors dominate. Disc mowers, small wood chippers, centrifugal slurry pumps, and light-duty planters all fall within the T2 torque envelope. Buyers operating multiple implements on the same tractor should verify the T2 rating covers the highest-demand implement in the fleet. Cross-kit failure caused by intermittent use of an oversized implement on an undersized shaft is the most common failure mode in mixed-implement compact tractor operations.
Irrigation pump drive applications place unique demands on the PTO shaft: unlike implement applications with variable shaft angle, a pump drive runs at a fixed angle for hours at a time, which prevents the self-lubricating effect of articulation. The sealed IP67 cross-kit specification is therefore particularly important for pump duty, and has been validated in year-round irrigation service without premature cross-kit failure. Full CE, ISO 9001, and TS/16949 documentation for Brazil INMETRO and LGPD compliance. For technical enquiries, contact Ever-Power Drive Line.
Assembly Diagram — Component Reference
Component reference numbers correspond to part codes in the table below
Component Part Numbers — T2
Source: Jiukai Driveline Catalog
| Component | Outer / Outboard | Inner / Inboard |
|---|---|---|
| Cross Kit | 2.01 (Ø23.8×61.3) | |
| Joint Simple | 2.0505B+2.01+2.06 | 2.0505B+2.01+2.07 |
| Splined Yoke | 2.0505B | |
| Tube Yoke | 2.06 | 2.07 |
| Tube | 2.03 | 2.04 |
Spline Profile Reference
Left: 1-3/8 inch 6-spline (Z6) for 540 rpm — Right: 1-3/4 inch 20-spline (Z20) for 1,000 rpm
Key Features
Heat-Treated Yoke Forgings
Alloy steel drop-forgings, shot-blasted and heat-treated. Fatigue life exceeds 1 million cycles at rated torque in field conditions.
Triple-Lip Sealed Cross Joints
Triple-lip internal seals block water, mud, and crop debris. Factory-greased EP2 lithium complex grease. Extended regreasing intervals.
OECD Code 4 Safety Shield
Bellows-style HDPE guard meets OECD Code 4 and CE Machinery Directive. Integrated chain anchor brackets at both shield ends.
Push-Pin Quick-Release Yokes
1-3/8 inch Z6 push-pin yoke standard; 1-3/4 inch Z20 and bolt-clamp options stocked. Lever-release for fast implement changes.
Custom OEM Manufacturing
Non-standard lengths and alternative yoke profiles manufactured to customer drawing. First-article approval process standard.
Traceable Quality Records
Dimensional inspection records, torque test samples, and paint adhesion verification per batch. Full traceability for import compliance.
Typical Applications
Rotary Tillers
15–25 hp compact tractor tilling. Sustained low-speed torque at rated capacity. Push-pin yoke standard for fast implement changes.
Small Irrigation Pumps
Continuous duty centrifugal pump drive at 540 rpm. Sealed cross kits are critical for fixed-angle pump applications running without articulation.
Disc Harrows
Moderate sustained torque for disc harrow gearbox drives. T2 cross-kit step-up from T1 suits disc harrow input shaft dimensions.
Installation and Maintenance
Attach safety chain to a fixed non-rotating point on both tractor and implement
Select the Correct Series
Use the torque table to select the series rated above your PTO output by at least 20%. Verify cross-kit size matches yoke seats.
Check Working Lengths
Connect implement and raise to max height. Inner tube must overlap outer by 50 mm min. Lower: check 80 mm engagement remains.
Install Yoke Connections
Push splined yoke fully onto tractor PTO; push-pin clicks into groove. Pull rearward to confirm retention. Repeat at implement end.
Attach Shield Retention Chains
Connect both shield-end chains to fixed points on tractor and implement. Taut enough to prevent rotation, with slack for movement.
Initial and Periodic Greasing
2–3 pumps EP2 per cross-kit nipple at installation. Regrease every 8 hours; every 4 hours in wet or abrasive conditions.
Frequently Asked Questions
- —Check the operating torque table for the Nm rating at your PTO speed
- —Your series must be rated above the implement’s maximum demand by at least 20%
- —If in doubt, size up — running an undersized shaft causes premature cross-kit failure
- —Yes — a CE-compliant HDPE safety shield is included as standard on every shaft
- —The shield meets EU Machinery Directive 2006/42/EC and OECD Code 4 requirements
- —Safety chain attachment brackets are integrated at both shield ends
- —Yes — cross kits, shields, push pins, safety chains, and grease nipples all stocked
- —Order cross kits by the part number shown in the component table on this page
- —Replacing a worn cross kit on-site takes approximately 30 minutes with basic tools
- —Stock series: MOQ is 1 piece — suitable for maintenance and replacement buyers
- —Custom lengths and special profiles: MOQ 50 pieces per specification
- —Volume pricing available for orders of 50 pieces and above — contact us for a quote
- —Stock series: 7–10 days from order confirmation to dispatch
- —Sea freight LCL to Santos port typically adds 20–25 days transit
- —Air freight available for urgent orders — contact us to arrange
Customer Reviews
Joao P.
Parana, Brazil — Implement Manufacturer
★★★★☆
- Running this shaft as primary drive on our round baler production line
- Custom length order with drawing review — fit geometry exactly on first article
- Minor shield colour inconsistency on first batch; corrected without dispute on next
Alejandro V.
Buenos Aires, Argentina — Agricultural Importer
★★★★★
- Top seller in our compact-tractor segment this season
- Shield compliance ready for tightening local PTO guard regulations
- Technical responses from Ever-Power sales team accurate and fast
Related Products
Shipping and Order Information
MOQ
1 pc (stock)
50 pcs (custom)
Lead Time
7–10 days (stock)
25–30 days (custom)
Shipping
Sea LCL/FCL to Brazil
Air freight available
Trade Terms
FOB Ningbo / Shanghai
CIF Santos available
Certifications
CE Certified
ISO 9001:2015
TS/16949
SGS InspectionLGPD Compliant
OECD Code 4 Shield
