Description
620 Nm @ 540 rpm
1,050 Nm Peak Torque
35-55 hp
CE Certified
ISO 9001 / TS16949
MOQ 1 pc — LGPD Ready
T5 PTO Drive Shaft — Operating Torque Parameters
Source: Jiukai Driveline Catalog — current series highlighted in orange
| Series | Cross mm | Kw @540 | Pk @540 | Nm @540 | Kw @1000 | Pk @1000 | Nm @1000 | MP Nm |
|---|---|---|---|---|---|---|---|---|
| T1 | 22×54 | 12 | 16 | 210 | 18 | 25 | 172 | 320 |
| T2 | 23.8×61.3 | 15 | 21 | 270 | 23 | 31 | 220 | 450 |
| T3 | 27×70 | 22 | 30 | 390 | 35 | 47 | 330 | 640 |
| T4 | 27×74.6 | 26 | 35 | 460 | 40 | 55 | 380 | 780 |
| T5 | 30.2×80 | 35 | 47 | 620 | 54 | 74 | 520 | 1,050 |
| T6 | 30.2×92 | 47 | 64 | 830 | 74 | 100 | 710 | 1,450 |
| T7 | 30.2×106.5 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| T7N | 35×94 | 55 | 75 | 970 | 87 | 118 | 830 | 1,800 |
| T8 | 35×106.5 | 70 | 95 | 1,240 | 110 | 150 | 1,050 | 2,250 |
| T38 | 38×105.6 | 78 | 105 | 1,380 | 123 | 166 | 1,175 | 2,500 |
| T9 | 41×108 | 88 | 120 | 1,560 | 140 | 190 | 1,340 | 2,800 |
| T10 | 41×118 | 106 | 145 | 1,905 | 170 | 230 | 1,650 | 3,500 |
Cross: 30.2×80 mm
540 rpm: 35 Kw / 47 Pk / 620 Nm
1,000 rpm: 54 Kw / 74 Pk / 520 Nm
Steel: 20CrMnTi alloy
Spline: 1-3/8 Z6 / 1-3/4 Z20
Shield: HDPE UV-stabilised
Grease: EP2 lithium sealed
Overview
Product Description
T5 is the volume leader in the Ever-Power Drive Line range — the most widely sold series to South American distributors. It serves the largest population of 40–55 hp tractors in Brazilian row-crop and hay operations. The 30.2×80 mm cross kit delivers 620 Nm at 540 rpm with a 1,050 Nm peak. For the full T Series PTO drive shaft range, see our category page.
T5 is where sealed cross-kit specification makes the most commercial difference. Agricultural contractors running rotary mowers daily typically regrease shafts only weekly. An open cross-kit T5 fails in contaminated soil within 200 hours under this maintenance pattern. The IP67-sealed cross kit on this T5 consistently delivers 400 or more hours before cross-kit maintenance is required — confirmed by contractor feedback from Mato Grosso operations. T5 introduces the 30.2 mm cross-kit pin diameter shared with T6 and T7, meaning cross-kit bearing cups across these three series share the same needle roller diameter and workshop tooling.
The 30.2 mm pin diameter commonality between T5, T6, and T7 simplifies spare parts stocking for distributors and service workshops. Journal length differentiates them: 80 mm for T5, 92 mm for T6, 106.5 mm for T7. Rotary mower contractors running 15 or more shaft replacements per season will find T5 volume purchasing offers the most commercially efficient unit economics in the T Series. Full CE, ISO 9001, and TS/16949 documentation for Brazil INMETRO and LGPD compliance. For technical enquiries, contact Ever-Power Drive Line.
Assembly Diagram — Component Reference
Component reference numbers correspond to part codes in the table below
Component Part Numbers — T5
Source: Jiukai Driveline Catalog
| Component | Outer / Outboard | Inner / Inboard |
|---|---|---|
| Cross Kit | 5.01 (Ø30.2×80) | |
| Joint Simple | 5.0505B+5.01+5.06 | 5.0505B+5.01+5.07 |
| Splined Yoke | 5.0505B | |
| Tube Yoke | 5.06 | 5.07 |
| Tube | 5.03 | 5.04 |
Spline Profile Reference
Left: 1-3/8 inch 6-spline (Z6) for 540 rpm — Right: 1-3/4 inch 20-spline (Z20) for 1,000 rpm
Key Features
Heavy-Duty Forged Steel Yokes
Drop-forged from 20CrMnTi, heat-treated to HRC 28–32 at bearing seat. Designed for high peak-load applications without premature wear.
Sealed Cross-Kit Bearings
Sealed needle-roller cross kits, double-lip seal on each cup. Grease nipple accessible with shield fitted. No removal required to service.
CE Safety Shield Supplied Standard
CE-marked HDPE bellows guard supplied with every shaft. Yellow for field visibility. Spring-clip anchors and chain points both ends.
All PTO Spline Standards Covered
1-3/8 inch 6-spline (ISO 500), 1-3/4 inch 20-spline, and 1-3/8 inch 21-spline. Clamp yoke and push-pin locking both available.
Custom Length OEM Service
Manufactured to compressed and extended length per customer spec. DWG review before production. MOQ 50 pcs, lead time 25–30 days.
Full Certification and Traceability
CE, ISO 9001, TS/16949 certs. Batch records include dimensional check, torque sampling, and finish inspection. SGS on request.
Typical Applications
Rotary Mowers
High-cycle mowing on 40–55 hp tractors. T5 is the market standard for 1.8–2.1 m rotary mowers in South America. Sealed cross kits extend service life.
Small Round Balers
Round baler drive with overrunning clutch. Handles bale-eject torque peaks up to 1,050 Nm. Standard series for 40–50 hp baler combinations.
Forage Wagons
Pickup reel and auger drive on 40–55 hp tractor-wagon combinations. Moderate continuous torque, intermittent peaks during crop slug pickup.
Installation and Maintenance
Attach safety chain to a fixed non-rotating point on both tractor and implement
Confirm Torque Rating
Cross-reference implement power with tractor PTO output in the table above. Select series rated 20% above maximum expected torque.
Adjust to Working Length
Cycle implement through full height range. Verify 50 mm min overlap at full extension, 80 mm at full compression.
Secure Yoke Connections
Engage push-pin yoke at tractor PTO; confirm audible click and positive retention. Bolt-clamp types: torque to manufacturer spec.
Route and Fix Safety Chains
Connect tractor-side chain to guard or frame; implement-side chain to implement body. Verify taut with implement level.
Grease Before First Use
Apply EP2 to both cross-kit nipples before initial operation. Service every 8 hours. Reduce to 4 hours in wet harvesting conditions.
Frequently Asked Questions
- —T7 and T7N share identical torque ratings but differ in tube outer diameter
- —T7N uses a narrower tube profile for specific European implement input housings where T7 creates interference
- —Always confirm T7 or T7N from the implement manual — cross kits are non-interchangeable
- —Connect the implement at normal working position and measure coupling centre distance
- —Compressed length must be 50 mm shorter than that distance; extended length 50 mm longer
- —Verify 50 mm minimum tube overlap at full extension and 80 mm at full compression
- —Drop-forged 20CrMnTi chromium-manganese-titanium alloy steel
- —Normalised, shot-blasted, and induction-hardened at the bearing seat journals after forging
- —Material certificates available per batch for import and quality documentation
- —T Series shafts are manufactured to balance tolerances for 540 rpm agricultural PTO operation
- —At 1,000 rpm, cross kits must be fitted correctly and in matched pairs
- —Custom-length shafts over 1,500 mm extended length are dynamically balanced before shipping
- —Electrostatic powder-coat in standard agricultural yellow or black
- —Yoke bearing seats and tube interior coated with rust-inhibiting oil before assembly
- —Salt-spray tested to 120 hours per ISO 9227 as part of outgoing quality inspection
Customer Reviews
Rafael T.
Santa Catarina, Brazil — OEM Equipment Builder
★★★★★
- Specified this series on our new mulcher range after testing three competitor shafts
- Sealed cross kits showed no ingress after 200 hours in wet harvesting conditions
- OEM drawing approval professional — first article passed without rework
Diego M.
Santiago, Chile — Agricultural Importer
★★★★★
- First order of 50 units arrived complete and correctly documented
- Push-pin yoke release worked on all units without any binding
- Will place a standing monthly order — quality consistent with samples
Related Products
Shipping and Order Information
MOQ
1 pc (stock)
50 pcs (custom)
Lead Time
7–10 days (stock)
25–30 days (custom)
Shipping
Sea LCL/FCL to Brazil
Air freight available
Trade Terms
FOB Ningbo / Shanghai
CIF Santos available
Certifications
CE Certified
ISO 9001:2015
TS/16949
SGS InspectionLGPD Compliant
OECD Code 4 Shield
